• Reaction mismatch between RCDC and STAAD for footing design

    Applies To Product(s): STAAD Advanced Concrete Design Version(s): Connect Edition Environment: Area: Concrete Design Subarea: Footing Design Original Author: Abhisek…

  • Get Base Pressure Result in Result File or OpenSTAAD

    I am working on foundation design automizaiton using STAAD.pro I can see base pressure in post processing mode, however, i don't find way to get the base pressure value in result file or openstaad function. How can i get the base pressure value…

  • How do I bring a reaction result box that is off screen back into view?

    When I try to view the reaction results some of the boxes are off the screen and so I can't drag them back on. How do I bring these boxes back onto the screen? Zooming out and changing the position of the origin doesn't change their position. Thanks…

  • STAAD Pro: Why there is horizontal reaction in my model when there is no any horizontal loading input

    Hi there, So as the subject of the discussion suggested, I have modelled my construction deck using plate element in STAAD Pro and assigned various vertical load (eg: construction load, selfweight, SDL etc.) and the deck is supported by diaphragm wall…

  • Very high Moment values at walls

    Hi, I am analyzing a two way RC Podium slab, 16" thick with walls and columns as support. The walls (all the walls) have extremely high in plane moment values under All Dead Loading and under Live Loading. The way the walls and columns are oriented…

  • Incorrect Foundation Loads at Column-Brace Foundation Node due to Tolerance Issue

    Applies To Product: RAM Foundation First Affected Version: 15.04.00.00 Found in Version: 15.04.00.00 Fixed and Released in Version: 15.05.00.00 Area: Design Issue #: 695498 …

  • Column Reactions from Pattern Loading in Ram Concept

    Hello, I am currently working on a Ram Concept model and I was wondering how to go about exporting the column reactions from pattern loading, in particular the unbalanced moments. In the manual it says that the "loading" and "load combinations" reactions…

  • RE: Column Reactions from Pattern Loading in Ram Concept

    If you add punching checks then you can use Rule Set Design - Strength Design - Tables (or plans) - Punching Check Reactions to get the enveloped reaction with the effect of load patterns considered.

  • RAM SS What Beams and Joists Frame Into

    I am trying to use RAM Structural System to design an apartment building out of Steel and Wood. The wood beams are modeled as steel joists (I have custom joist tables set up for the wood beam members). The steel beams are modeled as steel beams. Both…
Communities
Support and Services
Training and Learning
Social Media