• "DEFINE" COMMANDS FOR LOAD GENERATION SHOULD BE PROVIDED BEFORE SPECIFYING PRIMARY LOAD CASES.

    Tell me how can I get rif of this error please. DEFINE UBC ACCIDENTAL LOAD ZONE 0.4 I 1 RWX 3.5 RWZ 3.5 STYP 4 CT 0.0488 NA 1.2 NV 1.6 SELFWEIGHT 1.1 UNIT METER KN DEFINE WIND LOAD TYPE 1 WIND_PEDESTRIANBRIDGE <! STAAD PRO GENERATED DATA DO NOT MODIFY…
  • STAAD PRO connect edition to RAM connection stand alone

    Hi, We recently purchased the license for RAM connection stand alone and we are using STAAD PRO connect edition V22 Update 6 for analysis but without having an access to integrated RAM connection design found in STAAD PRO. Hence, the structural analysis…
  • What is the reason for designing of column without considering the worst load case even though I add several load combinations?

    In my model I analyze and design a G+8 RCC Structure, and the column is designed for only the first load case even though other load combinations give maximum axial force and moments. I attached the screenshots of output file below.
  • STAAD.Pro CONNECT Edition Installation

    Applies To Product(s): STAAD.Pro Version(s): CONNECT Edition Environment: Area: STAAD.Pro Download/Installation/Security/Performance Subarea: Installation Original Author…
  • Section Properties Not displaying in Report In Stadd Connect

    Hello Everyone ! I Have Done Analysis For Window Model Using Prismatic General Section. But While Generating Report , No Property Values i.e. Ixx, Iyy, Izz For Prismatic Section Were Displayed in Utilization Ratio Table. Please Suggest How to get…
  • How is STAAD.Pro licensed

    Applies To Product(s): STAAD.Pro Version(s): 22.00.00.15 and higher Environment: ALL Area: STAAD.Pro Licensing Solutions Original Author: Bentley Technical Support Group …
  • Partner in Athens-Greece (STAAD PRO CONNECT EDITION) for live webinar or seminar.

    Hello dear community, Is there any partner who is available in Athens-Greece in order to arrange a live seminar or webinar for Staad pro connect edition? Thank you very much in advance for your assistance and prompt response. Kind Regards, …
  • Structural TechTalk : STAAD.Pro CONNECT Edition

    Applies To Product(s): STAAD.Pro Version(s): CONNECT Edition Area: STAAD.Pro Webinars/Videos/Events Subarea: Original Author: Surojit Ghosh Structural Webinars: In 2020, Bentley…
  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • SIG Tech Talk: Eigen Solution and Response Spectrum Method in STAAD.Pro CONNECT Edition

    Tech Talk: Eigen Solution and Response Spectrum Method in STAAD.Pro CONNECT Edition Presenter: Kaushal Aggarwal , Technical Support Engineer, Bentley Systems Date/Time: 2 nd September , 11:30 AM GST (GMT + 4) Register Now Do you want to know about…
  • "OpenSTAAD" - Member weight per running meter length?

    Hi, Is there any option to get member weight per running meter length (either it's built-up or hot-rolled steel section) through OpenSTAAD API in VB.Net? Thanks.
  • STAAD SIG Virtual Workshop: Designing Concrete Walls With STAAD.Pro - January 23, 2020

    STAAD Special Interest Group: Designing Concrete Walls With STAAD.Pro Host: Sabrina Tedeschi, Senior Content Engineer, Bentley Systems, Inc. Date/Time: 23 January 2020 at 01:00 P.M. EST Register Now Attend this STAAD Special Interest Group…
  • SIG Virtual Workshop: STAAD – January 24, 2019 – You're Invited!

    Mark your calendar and invite your colleagues to the next STAAD Special Interest Group virtual workshop on Thursday, January 24, at 1 p.m. EST. We will discuss Modeling Floor Diaphragms in STAAD.Pro CONNECT Edition . Register now! This complimentary…
  • Nominate Your Structural Project for a Year in Infrastructure 2018 Award!

    We are now accepting nominations for Year in Infrastructure 2018 Awards (formerly Be Inspired). Nominating your project is the first step in gaining global recognition for your project! Submitting your project includes three simple steps: 1. Fill out…
  • SIG Workshop: STAAD - January 18, 2018 - You're Invited!

    Have you heard? The next STAAD SIG virtual workshop is set for Thursday, January 18, 2018 at 1 p.m. EST . Get ready to be more productive as you learn how to incorporate a physical model into your STAAD.Pro CONNECT Edition workflow. Sign up today! More…
  • Known Issues in STAAD.Pro CONNECT Edition

    This page contains a list of Known Issues found in the current version of STAAD.Pro CONNECT Edition identified after the application has been released. Note that for the Known Issues that may be of concern that are known to exist in the application…
  • STAAD SIG Virtual Workshop on September 21 - You're Invited!

    Join Bentley's Sabrina Tedeschi online Thursday, September 21, 2017 for the next STAAD Special Interest Group (SIG) workshop, Interoperability of STAAD.Pro CONNECT Edition With Integrated Structural Modeling . The one-hour session starts at 1 p.m. EDT…