• Response Spectrum Analysis & Design Forces Problem for Shear Wall Design in RCDC

    Hi everyone, I have faced a problem importing analysis forces from Staad Pro to RCDC for a shear wall example. I have performed seismic analysis by using the response spectrum method for a box-shaped and cantilever shear wall in StaadPro. I can determine…
  • Area of Steel Reqd. for Tran. Moment for Load Case ____ exceeds the Maximum Allowable for Element # ______ - STAAD.Pro Connect

    Good day. I was analyzing a model and designing the plates I made at STAAD.Pro Advanced Connect Edition 22.00.00.15. After the run analysis, the result gave the above notice on several plate elements I had. I modeled the plate elements using parametric…
  • What is the reason for designing of column without considering the worst load case even though I add several load combinations?

    In my model I analyze and design a G+8 RCC Structure, and the column is designed for only the first load case even though other load combinations give maximum axial force and moments. I attached the screenshots of output file below.
  • Error while updating column design in RCDC

    An error is showing while updating the column design in RCDC as shown below. please provide the solution .
  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • How to Model complex Concrete building projects ?

    What is the easiest and accurate way to modeling complex and huge Concrete building projects, Including irregular elements and the shear wall? Can I model staad building planner?
  • STAAD Webinar: Have no fear, Steel AND Concrete are here!

    It’s easier than ever before to take your project from analysis and design to automated drawing and documentation. Produce the bill of materials and gain instant insight into various design alternatives for the most cost-effective design. Please join…
  • STAAD SIG Virtual Workshop: Designing Concrete Walls With STAAD.Pro - January 23, 2020

    STAAD Special Interest Group: Designing Concrete Walls With STAAD.Pro Host: Sabrina Tedeschi, Senior Content Engineer, Bentley Systems, Inc. Date/Time: 23 January 2020 at 01:00 P.M. EST Register Now Attend this STAAD Special Interest Group…