• Steel Design Capacities Are The Same For Different Steel Strengths

    Hi, I have created a simply supported steel beam in the Physical Modeller (Connect Edition 22.11.00.156). I am designing the beam to the UK National Annex of Eurocode 3. I have attached 2 different models, the first is a simply supported steel beam…
  • I am getting error while designing per Chinese Steel Design Code known as SSDD

    Applies To Product(s): STAAD.Pro Version(s): All Environment: N/A Area: Steel Design Subarea: General Steel Design Solutions Original Author: Global Technical Support…
  • Having Doubt in STAAD Seismic Analysis for New Zealand Project

    Currently Working on Pipe rack Design for the New Zealand site. And I want to do Seismic analysis for the pipe rack. I have seen the seismic code list which is available in software. New Zealand Seismic code is not available in code list then how we can…
  • AS4100 in STAAD pro connect edition

    The AS4100 version in the Staad Pro Connection Edition is 1998, is that correct? is there any way to update it to 2018 version?
  • STAAD model steel utilization ratios go SKY HIGH with just changing some WWF column members using Canadian Code

    Hi, My company is working on a steel structure analysis model that is giving us very unusual results when we change some WWF550x420 members to standard rolled shapes. For example, if we change the WWF550's to W610x262's the model's utilization ratios…
  • Steel Design to IS800:2007 with STAAD.Pro CONNECT Edition - Part 1

    Tech Talk: Stability Consideration, Tension and Compression Presenter: Surojit Ghosh, Senior Structural Engineer, Bentley Systems Date/Time: 10 th June, 11:00 AM IST (GMT + 5:30) REGISTER NOW This session is the first in a series of four on Steel…
  • The analysis of a stepped column is possible or not?

    PDF Dear communities, Please provide me the solution or method to design & analysis the STEPPED column. For the reference, I have attached the pdf file, please check it & provide me the solution. Thank you.
  • SIG Workshop: STAAD – Using Custom Sections in Your Steel Design Workflow

    Title: SIG Workshop: STAAD – Using Custom Sections in Your Steel Design Workflow Host/Presenter: Sabrina Tedeschi, Senior Application Engineer, Bentley Systems, Inc. Date/Time: 18 February 2021, 01:00 P.M. EST Register Now! This STAAD Special Interest…
  • Bug in Warping constant in AISC360-16 Chapter E.4 (STAAD.Pro ver.22.04.00.40 )

    STAAD.Pro ver. 22.04.00.40 ” The correct Cw (Warping constant) value is not assigned by the members ” I modeled all these members in the GUI. Other than PG(Plate Girder), I used American Property, and created User table about PG. Here, I compared…
  • How to make a Ram Connection using C Channel type Section for columns or members

    Please suggest any workflow to make a connection, using C type channel section for column, or built up section having two C type channel sections (back to back or front). At present it seems that under RAM connection only I- type section, hollow type…
  • STAAD Webinar: Have no fear, Steel AND Concrete are here!

    It’s easier than ever before to take your project from analysis and design to automated drawing and documentation. Produce the bill of materials and gain instant insight into various design alternatives for the most cost-effective design. Please join…