• Staad Foundation

    I know that Staad Foundation assume the soil with an elastic performance to do the analysis and design for a superficial foundation. But, we have the possibility to change this and work with an inelastic performance for the soil?

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • I want to insert CFS section to my staad pro model

    THIS PROPERTY ONLY.... I WANT TO USE IN MY STAAD MODEL.... HOW TO USE THIS AS A COLDFORMED STEEL (AMERICAN)

  • Can't generate load for command and how to import new member for coldformed steel

    Actually i used user provided table for american cold formed steel. after assigning the properties This error is coming. Dono how to solve it. Can u help me ( Cannot generate load for command S1 Gx towarsd29) And one more thing how to add new section…

  • Tank Foundation

    Hello, I have one concern with regard to SFA capability to design mechanically anchored tank foundation. As shown above, technical reference manual is saying not covered while on the software itself showing mechanically anchored option. Now…

  • CODE AVAILABILITY FOUNDATION

    I AM USER OF STAAD PRO APPLICATION AND FOUNDATION SOFTWARE, MY QUESTIONS ARE, - CAN I CONFIGURE THE FOUNDATION PROGRAMME WITH THE EUROCODE ?, - I HAVE A LICENSE OF STAAD PRO V8i AND FOUNDATION, THE LAST ONE IS THE BASIC PROGRAMME. WITH THE BASIC LICENSE…

  • SFA Large Mat Model Processing/Analysis Speed?

    Has anyone had issues with the speed at which STAAD Foundation Advanced is processing and analyzing a large mat model? If so how did you resolve the issue? We have a large mat model with several thousand point loads, several dozen line/pressure loads…

  • HOW TO DEAL WITH CONCENTRATED BENDING MOMENTS AROUND COLUMNS IN PLATES ANALYSIS AND DESIGN

    Hello, Please, I am a bit uncertain about how to interpret or use moment values (plate contours) from staad plate analysis for design. I want to ask, is it correct to design the slab for the concentrated moments that occur around columns and walls…

  • Problem in increasing the cut-off mode shapes+ZERO ON DIAGONAL IN JACOBI ITERATION.

    Dear all, I did the dynamic simulation of a particular foundation on staad pro that the model was working without any problem. I've then added some rigid links at the bottom of foundation which have been linked to one spring at the center of gravity…

  • FOUNDATION SUPPORT

    I am new in Staad pro so please answer this question in very easy language....! What is the use of Foundation support i staad pro.... can we use this instead of fixed support... what is logic behind that support....

  • SOLID GEOMETRY

    I am new in staad pro so please answer this question in very easy language....! What is use of solid Geometry In Staad Pro.?
Communities
Support and Services
Training and Learning
Social Media