Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I was just wondering what causes the different bending moment outputs in RAM Concept as per the two images below taken from two different suspended slab designs. Why in the top image does the orientation of the outputs change? Thanks for the help…

dear friends, we are facing big combatibilty issues between STAAD PRO & STAAD OFFSHORE. some of the use facilities available in staad pro is not at all regonized by STAAD OFFSHORE. Because of this combatibility issues we are facing lots of problem…

Hello, I built a simple truss model in Staad pro V8i. I am wondering whether there is a way to extract elemental stiffness matrix in global coordinate? I can access global stiffness matrix by enter SET PRINT STFFINESS in the basic solver. Is there any…

Hi m Rohit. I was designing a 2 storey house usind Staad and after analysis found many errors in the staad results. so please Check the defects in the attached Staad design file and Give a solution. also check if the column positioning is correct or not…