• Program Error for Deflection Checks in Spans with Multiple Span Segments

    Applies To Product: Ram Concept First Affected Version: 08.04.00.117 Found in Version: 08.04.00.117 Released in Version: N/A Area: Analysis Issue #: 1149586 Problem Description…

  • RAM Concept Ultimate moment not tally with '' strength design , top reinforcement plan '' output for RC beam design

    q Dear all, I noticed that the Ult Moment from the design strip is not tally with the output of the area of steel reinforcement require for the beam design. The photos attached above : Beam size : 600 X 1000/1300 Mult = -1420 kNm (hogging) …

  • HI, everyone can anyone help me to solve about how to apply loads roof if we have 113Kn? thanks 4 all.

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 30-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 55 468.544 16072.7 192.577; 73 507.061 16072.7 -1.061; 107 358.857 16072.7 356.735; 152 7609.76 14763.6 -1.061; 153 467.483 16072…

  • Live load reduction parameter

    Ram Concept allows users to select the code for live load reduction. I selected IBC 2018. The slab longitudinal and latitude strip trib areas were approx. 400 sq ft. each. Based on live load reduction formula, since the trib area times Kll factor was…

  • Analysis Error regarding Code Rules

    https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/220024/long-term-deflection-error-message/673947#673947 I have posted under this related question-set. Can these errors be ignored?

  • Precompression Failure

    Hello, I am seeing a precompression failure for my two-way slab with opening infill beams (Layers > Deign Status > Status Plan). When I go to use the Auditor tool, I do not see much information about the precompression failure (i.e., the needed precompression…

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • Performance Issues - Longer Mesh Generation and Analysis Times

    Applies To Product: Ram Concept First Affected Version: 7.00.00.12 Found in Version: 7.00.00.12 Released in Version: 7.01.00.06 Environment: Windows 7 x64; Windows 10 Area: Performance…

  • Cross Section Trimming [TN]

    Applies To Product(s): RAM Concept Version(s): Various Area: Analysis; Design Overview There are two types of cross section trimming in RAM Concept: Single Cross Section Trimming and Inter Cross Section…

  • Manual Design Strip Boundaries [TN]

    Applies To Product(s): RAM Concept Version(s): Various Area: Modeling; Analysis; Design Overview The purpose of this tech note is to outline the process of defining manual strip boundaries for design strips…

  • Generating Span Segments [FAQ]

    Applies To Product(s): RAM Concept Version(s): Any Area: Modeling; Analysis; Design When I click the generate spans tool nothing happen, why? The General Spans tool tries to connect the supports together…

  • Design Strips and Slab Openings [TN]

    Applies To Product(s): RAM Concept Version(s): Various Area: Modeling; Analysis; Design Overview The purpose of this tech note it to aid users in defining design strips and understanding the layout of…

  • RAM Concept Torsion Design [TN]

    Applies To Product(s): RAM Concept Version(s): Any Environment: N/A Area: Analysis, Design Torsion and Section Analysis The net torsion moment in a cross section consists of two components…

  • RE: RAM Concept - Vibration Analysis Questions

    1. Yes, both the superimposed dead load and live load should be modeled on Additional Mass Loading. 2. The frequency for each mode can be reviewed using Layers - Vibrations - Vibration Analysis - Tables - Vibration Frequencies. 3. The Excitation Response…

  • RAM Structural System Results Cleared After Import into RAM Concept

    Applies To Product: Ram Concept First Affected Version: Found in Version: 06.00.01.06 Released in Version: Environment: All Area: File, Import/Export Subarea: N/A …

  • RAM Instability In Finite Element Analysis [TN]

    Product(s): RAM Elements, RAM Structural System, Ram Concept, STAAD.pro; MultiFrame; Microstran Version(s): Any Area: Analysis Instability in Finite Element Analysis A typical 3-dimensional Finite Element analysis…

  • Ram Concept - Long term losses

    Hi, This is my first post in this forum. I'm currently working for a post-tension consultant in Australia. I have some questions regarding Ram Concept and post-tension long-term losses According to Ram Concept manual the long-term losses includes…
Communities
Support and Services
Training and Learning
Social Media