• Ram Elements P-delta Analysis Results

    I am attempting to run a p-detla analysis on a single story solar carport system in RAM Elements. I have checked the corresponding box in the Analysis dialogue, and though the analysis runs fine and I don't get any errors, I am unable to find evidence…

  • Missing Custom Section in Database File: RAM Elements

    We have been working on a model and needed to create a number of custom sections to do so. I created all of the custom sections on my machine and when I went to send them to my coworker, I couldn't find them. I believed the custom sections would…

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Masonry wall module - no in plane forces or stresses

    Applies To Product: Ram Elements First Affected Version: 16.01.01.74 Found in Version: 16.01.01.74 Fixed in Version: 16.02.00.88 Environment: All (x64) Area: Installation; Analysis…

  • RAM Elements Member Deflections (TN)

    Applies To Product(s): RAM Elements Version(s): All Area: Design; Analysis RAM Elements - Member Deflections In RAM Elements, member deflections are calculated from the finite element results. Internally…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • RAM Solver Types

    Product(s): RAM Structural System, RAM Elements Version(s): Any Area: Analysis There are two basic solver types in RAM Structural System and RAM Elements (in-core and out-of-solver). Each of these basic solvers has…

  • Tilt-up wall analysis error for inactive DOF

    Product(s): RAM Elements Version(s): 13.03.01.124 Environment: N/A Area: Design Original Author: Bentley Technical Support Group Problem Description During the analysis of a Tilt-up wall with…

  • Passive Pressure Sliding Check Retaining Wall

    Applies To Product(s): RAM Elements; Retaining Wall Module Version(s): 12.01.00.29 Area: Analysis Problem Passive Pressure Sliding Check Retaining Wall There is no way to prevent…

  • Ram Elements - Tension Only Members

    Product(s): RAM Elements Version(s): Any Environment: N/A Area: Analysis; Modeling How can I assign a member to be tension-only? Go to the Members tab of the spreadsheet input, and go to the hinges sheet…

  • RAM Elements - Analysis Topics

    The TechNotes and FAQs in this section cover various topics that pertain to RAM Elements finite element analysis. Use the navigation tree on the left or the popular links below to browse.

  • RAM Instability In Finite Element Analysis [TN]

    Product(s): RAM Elements, RAM Structural System, Ram Concept, STAAD.pro; MultiFrame; Microstran Version(s): Any Area: Analysis Instability in Finite Element Analysis A typical 3-dimensional Finite Element analysis…

  • KMP_Affinity Error During Analysis in RAM Elements

    Applies To Product: RAM Elements First Affected Version: 12.05.00 Found in Version: 12.05.00 Fixed in Version: 13.00.00 Environment: Non Intel-processors Area: Analysis …

  • RAM Elements Dynamic Modal Analysis FAQ

    Applies To Product(s): RAM Elements Version(s): Any Area: Analysis How do I get RAM Elements to perform a Response Spectra Dynamic Analysis? 1. After the geometry of the model is…

  • Error in RAM Elements Version 11.0.1 (Build 15)

    While trying to design a model which is all steel members, the following error pops up; SteelCollection.dll not registered. I have included a snipping of the error window. Any help would be great. Regards, Scott
Communities
Support and Services
Training and Learning
Social Media