• Composite beam with 2 deck types

    Hi, I am modelling a beam with a change of deck along the length of the beam (half of the beam has a W2+3.5" verco deck, and the other half has a W2+2" deck). I read this response: Effects of Changing Deck Type - RAM | STAAD | ADINA Wiki - RAM | STAAD…

  • hello guys can anyone answer me for this point, what's different between specification beam (Release) and normal beam of the structure? the specification beam (release) will remove ?

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 05-Dec-22 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 1 0 0 0; 2 10 0 0; 3 0 5 0; 4 10 5 0; 5 0 0 10; 6 10 0 10; 7 0 5 10; 8 10 5 10; 9 1.66667 5 0; 10 3.33333 5 0; 11 5 5 0; 12 6…

  • Direction of seismic load

    Hi My understanding is that RAM SS does not analyze load combinations, instead, individual load cases are analyzed and then combined. I am analyzing a nonsymmetric structure and I want to include seismic load in two opposite directions. I think Ram…

  • Zero Load Vector Found

    Product: RAM Concrete Versions: All Area: Analysis Problem Description An error "Analysis Failed. Zero Load Vector Found" dialog is displayed when running the RAM Concrete Analysis. Reason The Story Data in the modeler…

  • Not a valid "Column base (CB)" joint

    I am attempting to assign and design gusset plate connections using Ram connection using data from a RSS model. When trying to assign a connection detail to a joint the error The joint composed by node "171" and members "120, 886" is not valid "Column…

  • RAM Frame Polygon intersection algorithm

    I receive an error message "Polygon intersection algorithm failed for the following input polygons:...." when I open RAM Frame. Once I click "OK", the RAM Frame module closes. I don't understand why I'm receiving this error. The only change I made in…

  • Combined footing tutorials

    Hello Everyone Please share with me the tutorials about a combined footings

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • How to create a cantilever slab by using the Physical modeler?

    How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

  • Error when importing from RAM Frame to RAM Connection

    Hello, I received this message when I went to import my RAM Frame analysis to RAM Connection. I noticed that my load combinations did not appear in RAM Connection, and I was puzzled why. I found that I could generate my loads, but my base plate design…

  • Crash During RAM Frame Analysis

    Applies To Product: RAM Structural System First Affected Version: 17.00.00.93 Found in Version: 17.00.00.93 Fixed and Released in Version: 17.00.01.09 Environment: x64 Area: Analysis…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • RAM SS Frame | Seismic Drift Period of Structure

    We are following ASCE 7, AISC 360, and the Direct Analysis Method in the RAM Structural System to analyze a building with direct analysis method. In step 6, it mentioned "As stated previously, it is generally felt that the building period used in…

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • RAMSS Gravity Loads [FAQ]

    Product(s): RAM Structural System; Ram Steel Version(s): All Area: Modeling; Analysis Original Author: Bentley Technical Support Group Are the applied surface loads cumulative? No, in RAM Structural System…

  • Effects of Changing Deck Type

    Product(s): RAM Structural System; Ram Steel Version(s): Any Area: Analysis; Design Problem Loads on beams from one-way deck are not calculated as expected when the deck changes along the length of the beam or between…

  • Modeling Continuous Foundations

    Applies To Product(s): RAM Structural System; Ram Modeler; Ram Foundation Version(s): 10.0 and later Area: Modeling; Analysis How can I model continuous foundations? In RAM Structural System, a continuous…

  • RAM Concrete Beam FAQ

    Product(s): RAM Structural System; Ram Concrete Version(s): Various Area: Modeling; Analysis; Design Overview This page addresses common issues and questions specific to concrete beams designed and analyzed in the…

  • RAMSS Two Way Decks [TN]

    Product(s): RAM Structural System; Ram Frame; Ram Concrete Version(s): 14.00.00.00 or later Area: Analysis Use of Two way decks in RAM Structural System The table below clarifies how One way and Two way decks can…

  • RAM Solver Types

    Product(s): RAM Structural System, RAM Elements Version(s): Any Area: Analysis There are two basic solver types in RAM Structural System and RAM Elements (in-core and out-of-solver). Each of these basic solvers has…

  • RAM Frame P-Delta [TN]

    Product(s): RAM Structural System; Ram Frame Version(s): Any Area: Analysis; Design P-Delta in RAM Frame General A general second-order elastic analysis requires consideration of effects caused by displacements…

  • RAM Container Crash during RAM Frame Analysis while Reading Model Data

    Applies To Product: RAM Frame Analysis First Affected Version: Found in Version: 15.05.00 Fixed and Released in Version: 15.06.00.000 Area: Analysis Issue #: 739116 Problem…

  • Overlapping Surface Loads on Two-Way Decks Ignored in RAM Frame and RAM Concrete

    Applies To Product: RAM Frame & RAM Concrete First Affected Version: Found in Version: 15.02.00 Fixed in Version: 15.05.00 Area: Analysis Issue #: 677249 & 689511 Problem…
Communities
Support and Services
Training and Learning
Social Media