Hello Everyone Please share with me the tutorials about a combined footings

How to model, analyze, and design this reinforced concrete cantilever beam using Staad Pro?

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

Hello Everyone How can I reduce the development length bars in the beam (Figure 1-1), I'm running to get a result like this beam (figure 2-1) Figure 1-1 Figure 2-1

Hello, I´m designing two small guardhouses in STAAD.Pro V8i SS5, both are RC structures with slab foundations, they are almost equal in principal geometry, loading and sections, the only thing that changes considerably from one model to the other is the…

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Hi m Rohit. I was designing a 2 storey house usind Staad and after analysis found many errors in the staad results. so please Check the defects in the attached Staad design file and Give a solution. also check if the column positioning is correct or not…

Hi, This is my first post in this forum. I'm currently working for a post-tension consultant in Australia. I have some questions regarding Ram Concept and post-tension long-term losses According to Ram Concept manual the long-term losses includes…

Hi all, i wish to know is there any command in STAAD to keep the sectional properties of staad in the required format? Kindly look at the attachment Thanks in advance

I have set up a model in RAM. It is A steel frame sat on an RC base. I have run the data check and there are no errors or warnings. I have run the steel beam design and it has given me section sizes. However, every time I try to run the steel…