Bentley Communities

Process to re-orient pile caps

Abhisek M

Applies To Product(s): STAAD Advanced Concrete Design Version(s): All Environment: N/A Area: Concrete Design Subarea: Pilecap Design Original Author: Abhisek Mandal…
- over 1 year ago
- RAM | STAAD | ADINA
- RAM | STAAD | ADINA Wiki
ISM: I am busy with a round-tripping process between ISM and Strand7. Would you please explain how the orientation axis t is derived?

Trevor Dunn

As I understand via section 11.3 of the ISM API 6.0, the R-axis is defined by the member location and would be the unit vector between the start and end nodes of the member. I do not see further information like this regarding the orientation axis t,…
- over 5 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Orientation of custom members/geometries using Section Wizard

Sye

As of now, any section defined in Section Wizard ( Free Sketch or Section builder) are exported to STAAD.Pro as a general or a prismatic section. The upt file created as a result of the export, comes in with the cross sectional properties only. It does…
- over 6 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
STAAD.Pro Modeling Solutions

Abhisek M

Applies To Product(s): STAAD.Pro Version(s): All Environment: N/A Area: Analytical Modeler Subarea: Modeling Solutions Original Author: Bentley Technical Support Group…
- 2 months ago
- RAM | STAAD | ADINA
- RAM | STAAD | ADINA Wiki
Staad.pro - Member 'Orientation' Label Size

Graham McNab

Hi By right clicking on the screen, selecting labels, then checking the 'beam orientation' box we get the blue/red/green arrows displayed. Does anyone know how to change the size of the arrows relative to the members? Currently they are very large…
- over 7 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
Microstran Angle Between AB and AC Too Small

Seth Guthrie

Applies To Product(s): Microstran Version(s): V8i Environment: N/A Area: Error messages Original Author: Bentley Technical Support Group Angle Between AB and…
- over 8 years ago
- RAM | STAAD | ADINA
- RAM | STAAD | ADINA Wiki
RE: Rotation of unequal angle profiles

Sye

You have specified the beta angles for most of these unequal angles as 180 and some are left to the default value of zero. The only issue with that is, the angles will be oriented at a certain angle to the global planes because STAAD is going to orient…
- over 8 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
No automatic way to change multiple beams start-end orientation

romkeris

Hello, In Staad.pro there is no automatic way to change multiple beams start-end orientation. It would be a useful command/option.
- over 11 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum