Hi, Can u explain anyone What is the meaning of REFORM 1 KGEOM 1 in non linear cable analysis what if i keep 0 instead of 1 " REFORM 1 KGEOM 0" Thanks in advance

sabbir ahmed -static - 07.05.22.std SOMEONE PLEASE REPLY, Calculation sheet is not available as design has failed, why it is showing ? sabbir ahmed -static - 07.05.22_foundation.xml

Please go through the file and reply ASAP. I am waiting.Please go through the file and reply ASAP. I am waiting. sabbir ahmed -static.std

Hi, Hopefully, you are doing well. could you please help me to solve this error? this is the code below. regards, DEFINE WIND LOAD TYPE 1 WIND -Z (WINDWARD WALL) <! STAAD PRO GENERATED DATA DO NOT MODIFY !!! ASCE-7-2010:PARAMS 137.000 KMPH 0…

6201.Project 1 new.std

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

Dear sir, I am doing the analysis of cable but the reactions are coming with an extreme value like 66kn along x. There is no any weight on the cable only self-weight is considered. Kindly explain to me why reactions are so conservative. Also, guide…

Dear sir, Kindly guide me how we can build a pre engineering beam as composite beam in stad pro?

Dear sir, I modeled the same canopy with two method in staad pro. In first method i am considering slab instead of composite deck. In second method i am considering composite deck. But for both cases forces in the members are different and…

Dear sir, I want to design a composite beam in staad pro and consider the weight of concrete slab manually ? is there any option to stop the staad to consider the weight automatically as per CW and concrete slab thickness? Kindly give some suggestions…

Dear sir, In My attached fil,I am creating a deck slab to make my steel beams as a composite beams.But I notice deck slab somewhere missing the steel beams .some beams are not composite?Why it is happening?do I have to add that beams manually in stad…

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Hello, I have just tried to assigned the camber option to beam with the default values. I have reffered to technical section and it said that the said command will perform better when it is used with the repeat load case. i tried but i was in vain…

yes i know the said thing but in actual practice we have different conditions for plate such as simply supported, fixed etc. then in space frame with the model say 3*3 bay both sides and height of building say 20 meter then in that case if i am…

Hello everybody, I am having some doubt about the slab orientation in composite slab design tab. the question is that if i want to design the solid slab connected with steel beam then what is to be done should i take the span as spanning between the…

As per Indian - SP6(1), the column capacity ( SAFE CONCENTRIC LOADS ) of ISHB 350 for effective length of 4m = 1047.14KN What is wrong with my coding ? Please help. The Column found to be safe even with 10000 KN Dany STAAD PLANE INPUT WIDTH…

HELLO, Is it possible to design the composite beam and composite column in staad ? if not then how do i design it in staad. with the help of macros or what?

Hi! I am trying to import SmartPlant 3D Structural model to STAAD.Pro through CIS/2 translator. I am able to import steel sections of Indian Section library. But I am unable to import Rectangular Section (Prismatic member not available in STAAD Section…

Section 5.20.3 states that "f 1 (Depth of section at start node) should always be greater than f 3 (Depth of section at end node)." In the model I am working in, it makes more sense for me to define my members from left to right which results in some…

I have a number of beam in my model and when i run a unity check some fail by different "clauses" Below are all the list clauses that i am coming up with. clause h1/2 clause h3 clause g clause e2 Does anyone know where i can find a definition…

Hello, If i am assigning the property of section wizard say four angles connected, behaving as square in plan then is it possible to design that particular element as per the given design codes?

There has been a new QA&R posting of STAAD.Pro V8i SELECTSeries 1 (build 20.07.06.35) on the Bentley SELECT server that addresses a number of issues which were not addressed in build 20.07.06.34 released on 18th March 2010. The additional issues addressed…

I need help in STAAD PRO. I am trying to get a moving load to go from one node to another. For example, if I have nodes N1, N2 and N3, and member M1 runs from N1 to N2, while member M2 runs from N2 to N3. How do I get a moving load to move from member…