Bentley Communities
Site
Search
User
Site
Search
User
Product Communities
RAM | STAAD | ADINA
RAM | STAAD | ADINA Wiki
IS:1893 (Part-I)-2002 Response Spectrum Philosophy
Sign In
-
RAM | STAAD | ADINA Wiki
+
ADINA
+
iTwin Analytical Synchronizer_
+
Structural Analysis Support Solutions
+
RAM Concept
+
RAM Connection
+
RAM Elements
+
RAM SBeam
+
RAM Structural System
-
STAAD.Pro
+
Revision History
-
STAAD.Pro Support Solutions
STAAD.Pro Safety Related Features
-
Analytical Modeling workflow
-
STAAD.Pro Analysis Solutions
+
Advanced Analysis
+
Buckling Analysis
+
DIRECT ANALYSIS
+
Dynamic Analysis
+
Eigen Solution
+
Floor Response Spectrum Analysis
+
Instability And Zero Stiffness
+
Miscellaneous Analysis Solutions
+
PDELTA Analysis
+
Pushover Analysis
-
Response Spectrum Analysis
Are beam section forces reported by STAAD.Pro for a response spectrum load case accurate?
Base Shear Does Not Match the Summation of Shears
Calculation of story drift for response spectrum load case
Direction Factor (f1, f2 and f3) for Response Spectrum load case for IS 1893(Part-1)-2016
Do we need to add Static Seismic Load cases additionally while performing Response Spectrum Analysis using IS1893(Part-1)2016 code?
How do I use the CUT OFF MODE command?
How Does Ground Acceleration Scale Factor Work
How Multiplying factor Vb/VB is taken into consideration in STAAD for IS1893 2016 code?
How to Input the Missing Mass Correction Command
I added dead+live load as seismic mass. Do I need need to define these loads separately too ?
In base shear what is considered as the base
Is Design Ground Acceleration Correct
IS:1893 (Part-I)-2002 Response Spectrum Philosophy
Missing mass – How to Consider
Multiple Floor Spectrum Generation Block Not Allowed
No Unsupported Masses Entered Error
Rayleigh Method Calculate Natural Frequency
Response spectrum analysis with compression only springs
Results from a response spectrum analysis
Scale Factor (f4) value for Response Spectra
Should I specify Response Spectrum in ALL directions in the same load case
Spectrum Load Case Joint Failing?
The natural frequencies obtained during a Response Spectrum Analysis do not match the Calculate Rayleigh Frequency
Torsional provision Consideration in IS 1893 (Part-1) 2016 Response Spectrum Analysis
When Specifying Damping, the Displacements and Forces Remain Same
Why are beam graphs not displayed for response spectrum load cases in STAAD.Pro
+
Seismic Analysis
+
Time History Analysis
+
STAAD.Pro Design Solutions
+
STAAD.Pro General Solutions
+
STAAD.Pro Import/Export Solutions
+
STAAD.Pro Modeling Solutions
+
Building Planner workflow
+
Connection Design workflow
+
Physical Modeling workflow
+
Piping workflow
+
Postprocessing workflow
+
Reports workflow
+
Steel AutoDrafter workflow
+
STAAD.Pro OpenSTAAD
+
(+) Archived Wikis
+
STAAD.Pro - Known Issues
+
STAAD.Pro Download/Installation/Performance/Security
+
STAAD.Pro Licensing Solutions
+
STAAD.Pro Webinars/Videos/Events
+
STAAD Advanced Concrete Design (RCDC)
+
STAAD Foundation Advanced (SFA)
+
STAAD.building
+
STAAD RCDC FE
+
Scenario Services
+
STAAD.offshore
+
Limcon
+
Microstran
+
MStower
+
Structural Dashboard
+
Structural WorkSuite
+
RAM | STAAD | ADINA Learning Resources
Simplifications to Bentley's Engineering Simulation Software Licenses
IS:1893 (Part-I)-2002 Response Spectrum Philosophy
Revision
Creation Date
Revision Author
Select All
Current Revision
Fri, Mar 24 2023 4:54 AM
Modestas
5
Revision #5
Thu, Jun 23 2016 8:19 AM
DSANJU
4
Revision #4
Wed, Jun 22 2016 1:30 PM
Steve Crabtree
3
Revision #3
Thu, May 5 2016 7:58 AM
DSANJU
2
Revision #2
Wed, Feb 26 2014 5:25 AM
Sudip Narayan Choudhury
1
Revision #1
Wed, Feb 26 2014 4:23 AM
DSANJU
Compare Versions
View current version