You are currently reviewing an older revision of this page.
In plan view within Ram Frame - Analysis mode, showing node numbers sometimes causes nodes above or below the plan to also show making it hard to read.
In order to show the nodes from a single plan view, the program uses a cut plane above and below that story. When stories are close together this sometimes causes nodes above or below the plane to still show. Sloped levels, hanging columns and partial height vertical braces (aka knee braces) can also cause problems.
In some case the problem can be resolved by using low resolution (View - Resolution - Low) also called line mode.
Using a 3D view with limited vertical extents can also work (View - Extents). Rotate the 3D view using Ctrl+Left mouse button [hold and drag].
RAMSS 3D Viewer [FAQ]
Structural Product TechNotes And FAQs