Need help working from home with your Bentley software? We're here to help - click here
The pages contained in this section provide a very basic guide for slab designers who are unfamiliar with RAM Concept and are interested in learning more about how the software works. This is an engineering-centric set of tutorials, focusing on the engineering building blocks of the software rather than on menus and commands. The segments are brief (no longer than about four minutes) and aim to give a designer an idea if he or she would like more detailed information or training.
A far more detailed version of this material is available on the Bentley LEARN Server under the following Learning Path:
QuickStart for Structural Engineers Using RAM Concept Learning Path
RAM Concept Getting Started Part 1 - Designing a Section (4:20)
RAM Concept Getting Started Part 2 - Designing Reinforcing Bars in a Slab (2:37)
RAM Concept Getting Started Part 3 - Using Design Spans (4:13)
RAM Concept Getting Started Part 4 - Handling Basic Irregularities in Geometry (4:23)
RAM Concept Getting Started Part 5 - Designing in Both Principal Directions (2:24)