1. Is it possible to quickly find out the total number of nodes & beams in a model ?
2. How do I stop the Auto Save screen from appearing over and over again in Staad.Pro?
3. How can I define a built up section whose cross section shape is not that of any standard rolled section?
4. Construction Grid Aligned to 3 Pre-defined Nodes
5. Change Units After Entering Loading Functions
6. Foundation Support Requires Giving the Subgrade Modulus and Supply a Direction
7. View Selected Objects Only
8. No Closed Polygon Found to Fill in with Plates
9. Viewing Individual Floors
10. Accessing STAAD.Pro Online Help
11. Converting Single Line Input to Multiline
12. Avoiding Stress Concentrations
13. User Defined Grid System
14. Applied Selfweight is More Than Total Weight of All Structural Elements 
15. Braces Carry Lateral Loads Only
16. Limitation on Number of Plates
17. Assigning Offsets to Plate Elements
18. Splitting Continuous Beams
19. W Shape Table what does Ct Stand For
20. Duplicated Nodes Warning
21. Is a Plate Diaphragm - Flexible Diaphragm or Rigid Diaphragm
22. Make Tool Tips Visible
23. Load Transfer Result is Unexpected
24. Change Model Units in an Existing Model
25. How to account for joists in stiffness analysis in STAAD.Pro ?
26. PRESTRESS vs POSTSTRESS member load in STAAD.Pro
27. Importing grids (as dxf files) into the STAAD.Pro Physical Modeler
28. Member releases in an excel sheet

See Also

Product TechNotes and FAQs

Structural Product TechNotes And FAQs

External Link

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!