Problem Description

In some cases, when connections are designed using the RAM Connection module launched from within STAAD.Pro, the connection status is shown as Pass in the Design Report sheet, but shown as "No Good" in the table..

Steps to Reproduce

1. Design connection in RAM Connection mode within STAAD.Pro
2. Status is shown as "No Good" in RAM Connection Results table although Ratio is < 1.
3. The Design Report Sheet show that the connection PASSes the check.

Workaround

Ignore the results table and use the Design Report Sheet to get the correct results.

Solution

The issue is addressed in release 20.07.11.82

See Also