Applies To | |||
Product: | STAAD.Pro | ||
First Affected Version: | |||
Found in Version: | 20.07.11.50 | ||
Released in Version: | 20.07.11.82 | ||
Environment: | All | ||
Area: | Post processing | ||
Subarea: | N/A | ||
Issue #: | 392114 |
If any primary load case containing self weight is included in a Repeat Load case, the effect of self weight on axial force calculation is ignored at intermediate sections, thereby producing incorrect axial forces at intermediate section locations for the Repeat Load case. The values at the start and end of the member are correct.
None
This is addressed in 20.07.11.82