| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | |||
| Found in Version: | 20.07.11.33 | ||
| Released in Version: | |||
| Environment: | All | ||
| Area: | Post processing | ||
| Subarea: | Report | ||
| Issue #: | 290996 |
Problem Description
When the report option Output > Steel Design Detail is used to get detailed design report, the generated report is incomplete for some codes like AISC 360-05 or AISC 360-10.
Steps to Reproduce
1. Open a model with AISC 360-10 code check (see attached).
2. Run the analysis.
3. Go into the Post Processing Mode.
4. Click on the Reports tab on the left-hand side of the screen.
5. The Report Setup dialog box will appear.
6. Under the Items tab Available menu, choose "Output".
7. Find "Steel Design Detail" and move it to the Selected window to the right.
8. Click OK to see the report. You'll find that the "Steel Design Detail" item is cut off at the bottom of the page. It is not continued on the next page but simply terminates.
.
Workaround
One can get the detailed design report ( TRACK 2 output ) printed in the analysis output file. A concise version of design report can be obtained by including the option Output > Utilization Ratio Table
Solution
This issue is currently active and a solution is awaited