| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | |||
| Found in Version: | 20.07.10.65 | ||
| Released in Version: | 20.07.11.45 | ||
| Environment: | All | ||
| Area: | Design | ||
| Subarea: | AISC 360-05/10, IS800-2007 and CSA S16-09/14 | ||
| Issue #: | 257528 |
Problem Description
When multiple tapered members are designed in group with CHECK CODE ALL command vs. designed individually, the design results do not match. Noted for multiple codes like AISC 360-05/10 / IS800-2007/ S16- 09/14.
Steps to Reproduce
Run an appropriate model with Tapered member and check the results of design for the two cases
a. using an individual CHECK CODE for each member
b. using a CHECK CODE for a LIST of members
Results seem to differ.
.
Workaround
The only option for now is to design these tapered members individually using CHECK CODE MEMB ... command
Solution
The issue is addressed in 20.07.11.45