Applies To
	Product:	STAAD.Pro
	First Affected Version:	20.07.11.33
	Found in Version:	20.07.11.33
	Released in Version:	20.07.11.50
	Environment:	All
	Area:	Modeling
	Subarea:	N/A
	Issue #:	264569, 336157

Problem Description

Inclined members are not being split through Geometry > Intersect Selected Members > Intersect.

Steps to Reproduce

1. Select two inclined members which intersect each other.
2. Go to Geometry > Intersect Selected Members > Intersect> OK

Note that the members are not split at the intersection.

.

Workaround

1. Open the program and go to configuration
2. Set the base unit as English.
3. Open the model and go to the top menu option View > Options > Tolerance
4. Set it to 0.1 inch and click on Apply > Ok
5. Select the members and try to intersect them by going to Geometry > Intersect Selected Members > Intersect. Enter a tolerance of 0.1 inch.

Solution

The issue is addressed in 20.07.11.50

See Also