Issues with the AISC 14.1 Profile Database

Sye — Thu, 01 Dec 2016 01:36:48 GMT

Current Revision posted to RAM | STAAD | ADINA Wiki by Sye on 12/1/2016 1:36:48 AM

	Applies To
	Product:	STAAD.Pro
	First Affected Version:
	Found in Version:	20.07.11.33
	Released in Version:	20.07.11.45
	Environment:	All
	Area:	Modeling
	Subarea:	AISC_14.1
	Issue #:	257492, 257533

Problem Description

It has been noted that the AISC 14.1 section profile database that is delivered with STAAD.Pro V8i SS6 (20.07.11.33) has a couple of issues :-

1) Models that include standard or extra strong pipe sections. These had been assigned incorrect STAAD names and thus a standard profile would be assigned a extra strong property and an extra strong profile would be assigned the standard property.

2) The first few profiles listed in the wide flange 'W Shape' table are new heavy sections and added to the database with a space in the STAAD name which when assigned to a model would cause the analysis engine to crash.

Steps to Reproduce

Open STAAD.Pro.
Open Configuration – Section Profile Table. Choose AISC_14.1 section database for AISC.
Now open any model.
Go to section database.
Open AISC W sections.
Try to assign any of the first 10 W sections to any member.
Open the input editor.
Edit it, save it and try to close the editor.
Program gives error message.

Workaround

A corrected version of the database can be downloaded from here

Solution

The issue is addressed in 20.07.11.45

Issues with the AISC 14.1 Profile Database

Sye — Thu, 01 Dec 2016 01:28:08 GMT

Revision 1 posted to RAM | STAAD | ADINA Wiki by Sye on 12/1/2016 1:28:08 AM

	Applies To
	Product:	STAAD.Pro
	First Affected Version:
	Found in Version:	20.07.11.33
	Released in Version:	20.07.11.45
	Environment:	All
	Area:	Modeling
	Subarea:	AISC_14.1
	Issue #:	257492

Problem Description

It has been noted that the AISC 14.1 section profile database that is delivered with STAAD.Pro V8i SS6 (20.07.11.33) has a couple of issues :-

Steps to Reproduce

Open STAAD.Pro.
Open Configuration – Section Profile Table. Choose AISC_14.1 section database for AISC.
Now open any model.
Go to section database.
Open AISC W sections.
Try to assign any of the first 10 W sections to any member.
Open the input editor.
Edit it, save it and try to close the editor.
Program gives error message.

Workaround

A corrected version of the database can be downloaded from here

Solution

The issue is addressed in 20.07.11.45

Issues with the AISC 14.1 Profile Database

Issues with the AISC 14.1 Profile Database

Problem Description

Steps to Reproduce

Workaround

Solution

See Also

Issues with the AISC 14.1 Profile Database

Problem Description

Steps to Reproduce

Workaround

Solution

See Also