Problem Description

Sometimes a model will include a wall of zero length that cannot be deleted. This might be a sign of a model corruption or some data that did not import correctly from ISM. The walls may cause errors in the framing tables or show as an error in the Integrity - Data Check indicating that the wall has a span of zero.

Solution

There are two possible ways to remove these walls.

1. Show wall numbers on screen to help locate the wall, usually at (0,0). Use the Layout - Walls - Change Material command to make the wall Concrete, then use Layout - Wall - Delete Fence to delete it.   
2. If option 1 does not work, use Integrity - Align Walls and select the wall. In the dialog change one end coordinate using the lower right coordinates and then the Align button. After doing that a warning will appear indicating that the "Move results in wall having length (6 inches. Would you like to delete the wall?". Click yes to delete the wall.

See also

Layout View Remains Zoomed Out in RAM Modeler