Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
RAM | STAAD | ADINA
  • Product Communities
RAM | STAAD | ADINA
RAM | STAAD | ADINA Wiki New material with custom properties cannot be added in the STAAD.Pro Physical Modeler
    • Sign In
    • -RAM | STAAD | ADINA Wiki
      • +ADINA
      • +Integrated Structural Modeling
      • +Structural Analysis Support Solutions
      • +RAM Concept
      • +RAM Connection
      • +RAM Elements
      • +RAM SBeam
      • +RAM Structural System
      • -STAAD.Pro
        • +How is STAAD.Pro licensed
        • +Installation Requirements
        • Security
        • +Revision History
        • -STAAD.Pro Support Solutions
          • +STAAD.Pro Analysis Solutions
          • +STAAD.Pro Design Solutions
          • +STAAD.Pro General Solutions
          • +STAAD.Pro General [FAQ]
          • +STAAD.Pro Verification Documents
          • STAAD.Pro Safety Related Features
          • List of Programs included in different types of License for STAAD.Pro
          • +STAAD.Pro Known Issues CE V22 Update 6
          • -Known Issues in STAAD.Pro CONNECT Edition
            • A "Failed to save document" error reported while creating a new model
            • Black Force Diagrams, Small Fonts or Color Changes
            • Crash when defining beam offsets
            • Elastic section modulus is incorrectly calculated for I section with cover plates for design as per AISC ASD (9th Edition)
            • Error in design of single angles as per AISC 360-16
            • Error in LTB Check as per Canadian S16-14 Code
            • Error in reading user table General type sections with profile points
            • Error Unhandled Exception when trying to open the editor in STAAD.Pro Connect Edition
            • Error when trying to create analytical model from the physical model
            • Exception Message Reported when Starting STAAD.Pro CE
            • Existing custom steel section databases cannot be opened in the STAAD.Pro CONNECT Edition
            • Incorrect Bending Capacity reported for Single Angles designed as per Canadian Steel Design Code CSA S16-09 or CSA S16-14
            • Members/Surfaces cannot be copied unless corresponding nodes are selected
            • New material with custom properties cannot be added in the STAAD.Pro Physical Modeler
            • Report Setup Does Not Allow Filtering of Load Cases in STAAD.pro Update 9
            • Run Analysis option is greyed out
            • Software crashes observed in STAAD.Pro CONNECT Edition 22.02.00.26
            • STAAD.Pro Crashes after AISC 360-16 design when tapered and non tapered members are used in a single design parameter block
            • STAAD.Pro is considering incorrect Cw values in some situations leading to incorrect LTB capacity calculations when designing per AISC 360-16
            • The .std files are not showing up with the STAAD.Pro CE icon
            • The Latitude parameter(IBC 2012) is being incorrectly set to zero
            • The Parametric Models Fails to Generate Mesh
            • Truss members with member loads
            • Unit Error in user table
            • Unity ratio displayed for only one member when designed as per AISC 360-16
            • User ID missing from the Output Report
            • Value of Basic Wind Speed generated as per the ASCE code cannot be edited using the GUI
            • When trying to import an ISM repository into STAAD.Pro, the Run option is grayed out
          • +Known Issues in STAAD.Pro V8i
          • STAAD Product Releases in December 2018 and Associated Licensing Changes
          • +Procedure for Downloading STAAD.Pro CE
          • +STAAD.Pro Developing The Model [FAQ]
          • +STAAD.Pro Driver Downloads [FAQ]
          • +STAAD.Pro Import Export Solutions
          • +STAAD.Pro Import/Export [FAQ]
          • +STAAD.Pro Installation/Licensing Solutions
          • +STAAD.Pro Miscellaneous Solutions
          • +STAAD.Pro Miscellaneous [FAQ]
          • +STAAD.Pro Modeling Solutions
          • +STAAD.Pro OpenSTAAD [FAQ]
          • STAAD.Pro OpenSTAAD_Solutions
          • +STAAD.Pro Postprocessing FAQ's
          • +STAAD.Pro Postprocessing Solutions
          • +STAAD.Pro TechNotes [TN]
          • STAAD.Pro Crashing for DELL laptop when Browsing a File Location
        • +STAAD.Pro CONNECT Edition - Tips & Tricks
        • Links for Technical Videos available in Bentley Structural YouTube Channel
        • +Integrated RAM Connection Solutions
        • +Recordings from past STAAD webinars
        • +Steel AutoDrafter
      • +STAAD Foundation Advanced
      • +STAAD Advanced Concrete Design (RCDC)
      • +STAAD.building
      • +STAAD RCDC FE
      • +Scenario Services
      • +STAAD.offshore
      • +Limcon
      • +Microstran
      • +MStower
      • +Structural Dashboard
      • +Structural WorkSuite
    • +RAM | STAAD Learning Resources

     
     Questions about this article, topic, or product? Click here. 

    New material with custom properties cannot be added in the STAAD.Pro Physical Modeler

      Product: STAAD.pro
    First Affected Version: 21.00.00.57
      Found in Version: 21.03.00.146
    Fixed and Released in Version:
      Area:  Graphic User Interface
      Issue #: 963307

    Problem Description

    New material with custom properties cannot be added in the STAAD.Pro Physical Modeler

     

    .

    Steps to Reproduce

    Within SPPM, go to the ribbon menu option Model and click on Model Catalog.

    Click on Add Material to create a new material.

    Note that whenever any of the values like E, G etc. are edited the cells turn red.

    Click on Ok and the following error message comes up

    Click on OK.

    The modified cells get highlighted in red and when any of those cells are clicked, errors pop up as shown below 

    Same thing happens with material Type set to Custom or Generic

    Workaround

    The only way for now is to drop the physical model and continue with the analytical model which would allow defining a custom material.

     

    Solution

    The problem will be addressed in the upcoming release of STAAD.Pro Connect Edition Update 4. 

    • Custom
    • custom material
    • 963307
    • New Material
    • known issue
    • 21.03.00.146
    • Share
    • History
    • More
    • Cancel
    • Sye Created by Bentley Colleague Sye
    • When: Wed, Oct 31 2018 3:11 PM
    • Sye Last revision by Bentley Colleague Sye
    • When: Wed, Oct 31 2018 3:12 PM
    • Revisions: 2
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2023 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies