Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
RAM | STAAD | ADINA
  • Product Communities
RAM | STAAD | ADINA
RAM | STAAD | ADINA Wiki Report Setup Does Not Allow Filtering of Load Cases in STAAD.pro Update 9
    • Sign In
    • -RAM | STAAD | ADINA Wiki
      • +ADINA
      • +Integrated Structural Modeling
      • +Structural Analysis Support Solutions
      • +RAM Concept
      • +RAM Connection
      • +RAM Elements
      • +RAM SBeam
      • +RAM Structural System
      • -STAAD.Pro
        • +How is STAAD.Pro licensed
        • +Installation Requirements
        • Security
        • +Revision History
        • -STAAD.Pro Support Solutions
          • +STAAD.Pro Analysis Solutions
          • +STAAD.Pro Design Solutions
          • +STAAD.Pro General Solutions
          • +STAAD.Pro General [FAQ]
          • +STAAD.Pro Verification Documents
          • STAAD.Pro Safety Related Features
          • List of Programs included in different types of License for STAAD.Pro
          • +STAAD.Pro Known Issues CE V22 Update 6
          • -Known Issues in STAAD.Pro CONNECT Edition
            • A "Failed to save document" error reported while creating a new model
            • Black Force Diagrams, Small Fonts or Color Changes
            • Crash when defining beam offsets
            • Elastic section modulus is incorrectly calculated for I section with cover plates for design as per AISC ASD (9th Edition)
            • Error in design of single angles as per AISC 360-16
            • Error in LTB Check as per Canadian S16-14 Code
            • Error in reading user table General type sections with profile points
            • Error Unhandled Exception when trying to open the editor in STAAD.Pro Connect Edition
            • Error when trying to create analytical model from the physical model
            • Exception Message Reported when Starting STAAD.Pro CE
            • Existing custom steel section databases cannot be opened in the STAAD.Pro CONNECT Edition
            • Incorrect Bending Capacity reported for Single Angles designed as per Canadian Steel Design Code CSA S16-09 or CSA S16-14
            • Members/Surfaces cannot be copied unless corresponding nodes are selected
            • New material with custom properties cannot be added in the STAAD.Pro Physical Modeler
            • Report Setup Does Not Allow Filtering of Load Cases in STAAD.pro Update 9
            • Run Analysis option is greyed out
            • Software crashes observed in STAAD.Pro CONNECT Edition 22.02.00.26
            • STAAD.Pro Crashes after AISC 360-16 design when tapered and non tapered members are used in a single design parameter block
            • STAAD.Pro is considering incorrect Cw values in some situations leading to incorrect LTB capacity calculations when designing per AISC 360-16
            • The .std files are not showing up with the STAAD.Pro CE icon
            • The Latitude parameter(IBC 2012) is being incorrectly set to zero
            • The Parametric Models Fails to Generate Mesh
            • Truss members with member loads
            • Unit Error in user table
            • Unity ratio displayed for only one member when designed as per AISC 360-16
            • User ID missing from the Output Report
            • Value of Basic Wind Speed generated as per the ASCE code cannot be edited using the GUI
            • When trying to import an ISM repository into STAAD.Pro, the Run option is grayed out
          • +Known Issues in STAAD.Pro V8i
          • STAAD Product Releases in December 2018 and Associated Licensing Changes
          • +Procedure for Downloading STAAD.Pro CE
          • +STAAD.Pro Developing The Model [FAQ]
          • +STAAD.Pro Driver Downloads [FAQ]
          • +STAAD.Pro Import Export Solutions
          • +STAAD.Pro Import/Export [FAQ]
          • +STAAD.Pro Installation/Licensing Solutions
          • +STAAD.Pro Miscellaneous Solutions
          • +STAAD.Pro Miscellaneous [FAQ]
          • +STAAD.Pro Modeling Solutions
          • +STAAD.Pro OpenSTAAD [FAQ]
          • STAAD.Pro OpenSTAAD_Solutions
          • +STAAD.Pro Postprocessing FAQ's
          • +STAAD.Pro Postprocessing Solutions
          • +STAAD.Pro TechNotes [TN]
          • STAAD.Pro Crashing for DELL laptop when Browsing a File Location
        • +STAAD.Pro CONNECT Edition - Tips & Tricks
        • Links for Technical Videos available in Bentley Structural YouTube Channel
        • +Integrated RAM Connection Solutions
        • +Recordings from past STAAD webinars
        • +Steel AutoDrafter
      • +STAAD Foundation Advanced
      • +STAAD Advanced Concrete Design (RCDC)
      • +STAAD.building
      • +STAAD RCDC FE
      • +Scenario Services
      • +STAAD.offshore
      • +Limcon
      • +Microstran
      • +MStower
      • +Structural Dashboard
      • +Structural WorkSuite
    • +RAM | STAAD Learning Resources

     
     Questions about this article, topic, or product? Click here. 

    Report Setup Does Not Allow Filtering of Load Cases in STAAD.pro Update 9

      Product: STAAD.Pro
    First Affected Version:
      Found in Version: 22.04.00.40
    Fixed and Released in Version:  
      Area:  Steel Design as per AISC 360-16
      Issue #: 1101622

    Problem Description

    The Report Setup dialog box contains a "Load Cases" tab which allows users to specify which load cases that are to be included in the report and which are to be omitted.  There is a known issue in STAAD.pro Update 9 that prevents this selection of load cases from being honored in the report, which includes all load cases no matter what.  

    .

    Workaround

    The following alternative method will allow for the creating of a report through means other than the “Report Setup” dialog box:

     

    1. In Post Processing, go to the Results tab at the top of the screen.
    2. Underneath and to the right, click on the “Select Load Case” button. You will see the Results Setup dialog box appear.
    3. In this dialog box, go to the Loads tab.
    4. Place the desired load cases in the Selected window.  The load cases to be omitted should go in the Available window.
    5. Click Apply and OK.  Now all tables/results in Post Processing will be updated to display data for the selected load cases only.  
    6. Right-click on any table and select Print Preview to verify only the desired load cases are reported.  
    7. Then print to PDF.  The same can be done for any other desired items (beam force summary, node displacements, reactions envelope, etc.)  In this way you can compile a group of PDFs forming your report with correctly filtered load cases.

    . 

    Solution

    The defect is being addressed and a fix will be available in the upcoming STAAD.Pro CONNECT Edition V22 Update 10.

    • Load Cases
    • report setup
    • Load Case Reporting
    • Share
    • History
    • More
    • Cancel
    • priegel Created by Bentley Colleague priegel
    • When: Wed, Mar 23 2022 4:42 PM
    • Revisions: 1
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2023 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies