Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
RAM | STAAD | ADINA
  • Product Communities
RAM | STAAD | ADINA
RAM | STAAD | ADINA Wiki Vertical earthquake shaking in the analysis as per IS1893(Part-1)-2016
    • Sign In
    • -RAM | STAAD | ADINA Wiki
      • +ADINA
      • +iTwin Analytical Synchronizer_
      • +Structural Analysis Support Solutions
      • +RAM Concept
      • +RAM Connection
      • +RAM Elements
      • +RAM SBeam
      • +RAM Structural System
      • -STAAD.Pro
        • +Revision History
        • -STAAD.Pro Support Solutions
          • STAAD.Pro Safety Related Features
          • -Analytical Modeling workflow
            • -STAAD.Pro Analysis Solutions
              • +Advanced Analysis
              • +Buckling Analysis
              • +DIRECT ANALYSIS
              • +Dynamic Analysis
              • +Eigen Solution
              • +Floor Response Spectrum Analysis
              • +Instability And Zero Stiffness
              • +Miscellaneous Analysis Solutions
              • +PDELTA Analysis
              • +Pushover Analysis
              • +Response Spectrum Analysis
              • -Seismic Analysis
                • Base shears, reactions, moments all reported as zeros for generated seismic load case
                • Calculation of Seismic Load generation by Rayleigh frequency
                • Colombian Seismic Verification Example
                • Consideration of minimum base shear criteria in Vertical Seismic Load generation in IS1893(Part-1)-2016
                • Consideration of Minimum Base shear in IS1893(Part-1)-2016 seismic analysis
                • Consideration of Rotational Mass in the analysis
                • ERROR - EITHER NA OR NV FACTOR HAS NOT BEEN SPECIFIED
                • Error ST seismic parameter is missing
                • ERROR THE RAYLEIGH FREQUENCY 1.13523E-06 IS LESS THAN 0.00001 FOR LOAD
                • General error with models having ST 3 parameter in IS:1893 seismic definition
                • IS 1893-1 2002 Story Drift
                • Major changes observed in IS 1893(Part-1)-2016 compared to the 2002 version of the code
                • Mismatch between manual and STAAD calculated Ah value
                • NO LOADING DEFINED FOR UBC LOAD. RUN TERMINATED
                • Seismic analysis of a large dia pipe
                • Seismic forces calculation as per ASCE equation
                • Significance of the Rw Value in the UBC code
                • Torsion consideration in IS 1893-2002 seismic analysis
                • Torsional Consideration in IS1893 (Part-1) 2016 Equivalent Static Analysis
                • Types of Irregularities as per IS 1893(Part-1)-2016 evaluated in STAAD.Pro CE
                • Use of DX and DZ parameter in IS1893(Part-1)-2016 seismic analysis
                • Use of GL parameter in IS893(Part-1)-2016 seismic analysis
                • Use of HT parameter in IS1893(Part-1)-2016 Seismic
                • Vertical earthquake shaking in the analysis as per IS1893(Part-1)-2016
                • WARNING IF THIS UBC/IBC ANALYSIS HAS TENSION/COMPRESSION
                • Where do the value of Ta and Tb derived from
              • +Time History Analysis
            • +STAAD.Pro Design Solutions
            • +STAAD.Pro General Solutions
            • +STAAD.Pro Import/Export Solutions
            • +STAAD.Pro Modeling Solutions
          • +Building Planner workflow
          • +Connection Design workflow
          • +Physical Modeling workflow
          • +Piping workflow
          • +Postprocessing workflow
          • +Steel AutoDrafter workflow
        • +STAAD.Pro OpenSTAAD
        • +(+) Archived Wikis
        • +STAAD.Pro - Known Issues
        • +STAAD.Pro Download/Installation/Performance/Security
        • +STAAD.Pro Licensing Solutions
        • +STAAD.Pro Webinars/Videos/Events
      • +STAAD Foundation Advanced
      • +STAAD Advanced Concrete Design (RCDC)
      • +STAAD.building
      • +STAAD RCDC FE
      • +Scenario Services
      • +STAAD.offshore
      • +Limcon
      • +Microstran
      • +MStower
      • +Structural Dashboard
      • +Structural WorkSuite
    • +RAM | STAAD Learning Resources
    • Simplifications to Bentley's Engineering Simulation Software Licenses

     
     Questions about this article, topic, or product? Click here. 

    Vertical earthquake shaking in the analysis as per IS1893(Part-1)-2016

       
      Applies To 
       
      Product(s): STAAD.Pro
      Version(s): All
      Environment:  N/A
      Area:  STAAD.Pro Analysis Solution
      Subarea:  Seismic Analysis
      Original Author: SANJIB DAS, Bentley Global Technical Support Group
       

     

    There has been an amendment # 2 to IS1893(Part-1)-2016 published in November 2020. It provides the following guideline-

    Under the aforementioned sitations, one should generate Equivalent Static IS1893(Part-1)-2016 load case or IS1893(Part-1)-2016 Response Spectrum load case.

    • STAAD.Pro CONNECT Edition
    • seismic analysis
    • IS1893 2016 part1
    • Share
    • History
    • More
    • Cancel
    • DSANJU Created by Bentley Colleague DSANJU
    • When: Wed, Sep 28 2022 6:03 AM
    • Abhisek M Last revision by Bentley Colleague Abhisek M
    • When: Mon, May 29 2023 9:31 AM
    • Revisions: 3
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2023 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies