RAM Structural System beams, columns and braces are pushed to the iTwin Analytical Synchronizer as Curve Member objects.
RAM Structural System member properties can be viewed for each Curve Member object in the iTwin Analytical Synchronizer.
iTAS Curve Member Property
Load Resistance
Indicates the Framing Property assigned to each member in the RAM Modeler:
Camber
Indicates the camber assigned to steel beams in the RAM Steel Beam Module.
System Kind
Indicates the type of material used to model the member in RAM Structural System:
Use
Indicates the member type in RAM Structural System:
Member Fixity
In RAM Structural System, a yield strength of steel is assigned to each steel member when it is modeled. The material properties will be pushed to the iTwin Analytical Synchronizer as Steel objects.
In RAM Structural System, steel section properties are defined in the Master Steel Table and the Master Steel Joist Table. The steel section properties will be pushed to the iTwin Analytical Synchronizer as Table Section and Table Steel Joist objects.
In RAM Structural System, web openings can be modeled in gravity steel I-Section Beams in the RAM Modeler. Web openings will be pushed to the iTwin Analytical Synchronizer as Feature Subtraction objects.
In RAM Structural System, the reactions due to gravity loads are calculated in the RAM Steel Beam Module. The beam end reactions, due to gravity loads only, can be pushed to the iTwin Analytical Synchronizer as service reactions or factored reactions, depending on the Push Settings in the iTwin Services.
In RAM Structural System, shear studs on composite steel beams are designed in the RAM Steel Beam Module. The stud configuration will be pushed to the iTwin Analytical Synchronizer as Shear Stud Zone objects.