Applies To Product(s): STAAD.Pro Version(s): CONNECT Edition (21.xx.xx.XXX) Environment: ALL Area: STAAD.Pro Licensing Solutions Subarea: License Management Original Author…

Product(s): RAM Elements Version(s): 10.00 or later Area: Modeling; Analysis; Design For combined footings, why do I get a warning for rigid entity length to width ratio? The foundation module uses the provisions…

Product(s): RAM Structural System, RAM Elements Version(s): Any Area: Analysis There are two basic solver types in RAM Structural System and RAM Elements (in-core and out-of-solver). Each of these basic solvers has…

Applies To Product(s): RAM Concept Version(s): Various Environment: All Area: Modeling; Analysis Does Concept ignore soil tension? You can reduce the tension by iteration. The tension gets…

Applies To Product(s): RAM Structural System Version(s): 14.05.00.00 or later Area: Files How can I decouple or unlink a Ram Concept file that is part of a Ram Structural System file? Open the Ram SS…

Applies To Product(s): RAM Concept Version(s): Any Environment: N/A Area: Results Original Author: Bentley Technical Support Group Why is the Audit or plotted capacity less than the…

Applies To Product(s): STAAD.Pro Version(s): 20.07.10.41 Environment: N/A Area: N/A Subarea: N/A Original Author: Modestas Turulis, Bentley Technical Support Group …

Product(s): RAM Structural System; 3D Viewer Version(s): 10.0 and later Area: Graphics Why are my graphics chunky or blocky looking? RAM Structural System uses open GL based graphics. Many graphics adapters are set…

Product(s): RAM Structural System; Ram Manager Version(s): All Area: Files; General RAM SS File-Open Troubleshooting If an error occurs when trying to open a .rss file, please try the following steps: 1. Close out…

Product(s): RAM Structural System, RAM Concept Version(s): Any Environment: N/A Area: Analysis The Different Analysis Types in RAM Structural System Throughout the RAM Structural System there are distinct…

Product(s): RAM SS; Ram Frame; Ram Modeler Version(s): All (V8i, CONNECT Edition) Environment: All Area: Analysis; Results; Graphics How can I assign Frame Numbers? Frame numbers can be assigned in either…

Product(s): RAM Structural System Version(s): 10.00.00.00 or later Environment: N/A Area: Printing, Graphics Original Author: Bentley Technical Support Group Problem Description When printing…

Applies to Product(s): RAM Concept Version(s): Any Area: Design; Detailing How can I display the code provision that governs the design of program reinforcement? The code controlling provision can be displayed…

Product(s): RAM Concept Version(s): 4.0 and greater Environment: N/A Area: Analysis Original Author: Bentley Technical Support Group The ACI code controls differential deflections occurring after…

Product(s): RAM Concept Version(s): 4 or greater Environment: N/A Area: Analysis Original Author: Bentley Technical Support Group Why does the load history deflection increase when reinforcement…

Product(s): RAM Concept Version(s): 4 or greater Environment: N/A Area: Analysis Original Author: Bentley Technical Support Group How can I resolve a warning with load history analysis convergence…

Product(s): RAM Connection; Version(s): Connection 9.0.0 Environment: Windows 7; Windows Vista; Windows XP Area: General; Installation For a more general description of how to change the design code setting…

Applies To Product(s): RAM Concept Version(s): V8.2.0 and later Area: Analysis The following creep/shrinkage models are implemented in RAM Concept Version 8 Update 2 and later: ACI 209.2R-08/GL 2000…

Product(s): RAM Structural System; Ram Frame Version(s): Any Area: Analysis; Design P-Delta in RAM Frame General A general second-order elastic analysis requires consideration of effects caused by displacements…

Applies To Product(s): RAM Elements Version(s): 11.00.00.00 or later Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical Support Group …

Applies To Product(s): RAM Elements Version(s): 11.00.00.00 or later Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical Support Group …

Applies To Product(s): RAM Elements Version(s): 11.00.00.00 or later Area: Design General The format for steel unbraced lengths (Lb pos, Lb neg, L33, L22, and LTorsion) changed in V11. The help context…

Product(s): RAM Structural System; Ram Steel; Ram Modeler Version(s): 13.00.00.00 or later Environment: N/A Area: Analysis; Modeling Framing Tables Errors General There are many instances where modeling…

Applies To Product(s): RAM Concept Version(s): Various Area: Modeling; Analysis; Design Overview The purpose of this tech note it to aid users in defining design strips and understanding the layout of…

Applies To Product(s): RAM Concept Version(s): Various Area: Analysis; Design Overview There are two types of cross section trimming in RAM Concept: Single Cross Section Trimming and Inter Cross Section…