Applies To Product: Ram Elements First Affected Version: 16.01.01.74 Found in Version: 16.01.01.74 Fixed in Version: 16.02.00.88 Environment: All (x64) Area: Installation; Analysis…

Applies To Product(s): RAM Elements Version(s): All Area: Design; Analysis RAM Elements - Member Deflections In RAM Elements, member deflections are calculated from the finite element results. Internally…

Product(s): RAM Structural System, RAM Elements Version(s): Any Area: Analysis There are two basic solver types in RAM Structural System and RAM Elements (in-core and out-of-solver). Each of these basic solvers has…

Product(s): RAM Elements Version(s): 13.03.01.124 Environment: N/A Area: Design Original Author: Bentley Technical Support Group Problem Description During the analysis of a Tilt-up wall with…

Applies To Product(s): RAM Elements; Retaining Wall Module Version(s): 12.01.00.29 Area: Analysis Problem Passive Pressure Sliding Check Retaining Wall There is no way to prevent…

Product(s): RAM Elements Version(s): Any Environment: N/A Area: Analysis; Modeling How can I assign a member to be tension-only? Go to the Members tab of the spreadsheet input, and go to the hinges sheet…

The TechNotes and FAQs in this section cover various topics that pertain to RAM Elements finite element analysis. Use the navigation tree on the left or the popular links below to browse.

Product(s): RAM Elements, RAM Structural System, Ram Concept, STAAD.pro; MultiFrame; Microstran Version(s): Any Area: Analysis Instability in Finite Element Analysis A typical 3-dimensional Finite Element analysis…

Applies To Product: RAM Elements First Affected Version: 12.05.00 Found in Version: 12.05.00 Fixed in Version: 13.00.00 Environment: Non Intel-processors Area: Analysis …

Applies To Product(s): RAM Elements Version(s): Any Area: Analysis How do I get RAM Elements to perform a Response Spectra Dynamic Analysis? 1. After the geometry of the model is…