QuickStart for Terrain & Geometry Using OpenRoads Technology Virtual Classroom, United States Mar. 23, 2015 – 1:00 PM to 4:00 PM EDT Jeffrey Martin
This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, MX, and Power InRoads software to use the OpenRoads Technology. You will learn to use the software to setup working files, attach existing ground terrain and aerial imagery, and define horizontal and vertical geometry. After completing this course we recommend you continue your learning with the QuickStart for Roadway Modeling Using OpenRoads course where you will learn how to model a roadway corridor and intersection.
QuickStart for Roadway Modeling Using OpenRoads Technology Virtual Classroom, United States Mar. 24, 2015 – 1:00 PM to 4:00 PM EDT Jeffrey Martin
This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, MX, and Power InRoads software to use the OpenRoads Technology. You will learn to model the roadway corridor using an existing two-lane urban typical section with curb and cutter and sidewalk, control the pavement with geometry, and review the 3D corridor model. You will also model a T-intersection complete with curb returns and side slopes using a civil cell. Finally, you will place pavement markings on the model. Before completing this course we recommend you complete the QuickStart for Terrain & Geometry Using OpenRoads course.
Terrain Modeling Virtual Classroom, United States Mar. 25, 2015 – 1:00 PM to 3:00 PM EDT Jeffrey Martin
This course teaches how to display terrain models to view different source and computed features including boundary's, triangles, contours, and thematic height illustrations. You will also learn how to import graphic elements into terrain models, identify and fix terrain model problems, and combine multiple terrain models together.
Creating Centerline Geometry Virtual Classroom, United States Mar. 26, 2015 – 1:00 PM to 3:00 PM EDT Jeffrey Martin
This course teaches how to import, create, edit, and view horizontal and vertical centerline geometry. After completing this course you will have a solid understanding of not only the OpenRoads centerline geometry tools but more importantly the design intent captured by the OpenRoads Technology.
Creating Ramp Geometry Virtual Classroom, United States Mar. 27, 2015 – 1:00 PM to 3:00 PM EDT Jeffrey Martin
Create horizontal geometry for a cloverleaf interchange including loop ramps, loop ramp connectors, diamond ramps, entrance and exit tapers, edges of pavement, and shoulder geometry.