Recently started using GeoPak site and I've run into a problem with curb and gutter sections. The corners do not intersect. Is there a way to resolve this issue or do I always have to offset the curb sections inside my object?Attached a picture of what is going on
Hi,
There are a couple of things you can do to get the curbs to miter when the sections are applied to seperate elements. One is to apply the section to both elements at the same time. Another is to move the end of one of the elements away from the other and then snap it back. A third is to use the Site Elements Trim to Intersect tool in the Modify Elements tool bar. The Trim to Intersect tool will create the miter even if the elements are already snapped together such as you have in your screen capture.
Please see this screen recording:
http://screencast.com/t/OTVlMWNjM2Y
Neil Wilson (aka Neilw)
Power Civil v8i 08.11.07.245
AutoCAD Civil 3D 2018