You will find the Microstation V8 version here: http://www.glamsen.se/MSTurn.htm
And the latest version here, works with ORD: https://www.glamsen.se/MSTurn_2.htm
Pretty slick. It even works in PowerCivil for NA!
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
This works great so I was instructed to setup a custom template of vehicles. It tells me that I must be registered to save changes and tells me to consult the help file... but when I do it says nothing about registering. Did I do something wrong?
Terry Judy Jr.
MS SS2 08.11.09.357
GeoPAK SS2 08-11.07.536
Cook Coggin Engineers, Inc. - Tupelo, MS
My apologies but I made a mistake in my previous post. Please ignore point 2). I was entering the data improperly.
Sweet
Jody Barker Senior Highway Designer Palmer Engineering 400 Shoppers Drive | Winchester, KY 40391 DD 859 355.1541 | O 859 744.1218 | M 859 432.0622jbarker@palmernet.com
Hi!
This value is calculated based on the truck geometry and have no effect on the simulation. The value was only intended to give some extra information to the user about the truck .
The minimum turning radius for a vehicle combination can’t be calculated before the simulations and since this value can be misinterpreted I’ve decided to remove that information in next update.
/Lars
Just found this, thanks. Does the program run with v8i?
Yes, it should work with v8i. I'm working on a new version of MSTurn based on feedback in this post. Individual colors, levels and linetypes for sweep lines and vehicles can be set by users. Lock to lock and evaluated speed along a path will also be in that update.
I've now added some of the feedbacks from this post in MSTurn.
The main enhancement is that the user can set colors, levels and linetypes for booth vehicle and sweep path.
I've also added lock to lock for trucks, the update doesn't add lock to lock values for vehicles in the library file so you need to do that yourself. A common value to use is 6-8 seconds.
The minimum radius for vehicles is back, some users wanted that. I've tried to explain it better in the help file.
I'm not comfortable with "advertising" my freeware in this way, using an old thread. Hope that's ok
You can download update or complete installation from this site: www.glamsen.se/MSTurn.htm
I haven't had opportunity to test all of your enhancements but I've looked through the settings and see that you have made quite an improvement in the visualization capabilities.
Again, thank you very much for your generous offering. This tool is excellent!
Neil Wilson (aka Neilw)
Power Civil v8i 08.11.07.245
AutoCAD Civil 3D 2018
Unknown said: Yes, it should work with v8i. I'm working on a new version of MSTurn based on feedback in this post. Individual colors, levels and linetypes for sweep lines and vehicles can be set by users. Lock to lock and evaluated speed along a path will also be in that update.
Sorry it's taken so long to get back to you, but yes it works fine with v8i. Thanks for your work on this.
Hi,
Update after update this is becoming greater and greater.
Thank Lakl for this very helpful plugin.
José
Finally I've added the last missing feature in MSTurn, an option for plotting the swept envelope. Youll find the freeware and update for Microstation here: www.glamsen.se/MSTurn.htm
Thank you all for giving feedback.