https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/100197/inroads-extended-descriptionsIR 8.11.7.615 What’s the secret to getting cogo point extended descriptions to work? I can set an extended description for a cogo point, view that description in an XML report, save the ALG file, close it, reopen it, and the extended description isen-USTelligent Community 12https://communities.bentley.com/thread/297062?ContentTypeID=1Fri, 22 Aug 2014 13:48:01 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:7939972a-08a6-4001-a432-6bca3b0a9f58Jacquelyn Pettus<p>I am not aware of any other workarounds for this issue, however, I have verified that the problem has been fixed in the latest version of InRoads.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/296518?ContentTypeID=1Tue, 19 Aug 2014 16:35:48 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8b2aee06-a856-48cf-adaf-a9da7519957aKate Severson<p>Unfortunately the extended descriptions don&#39;t persist when you save the ALG and then reopen it.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/296503?ContentTypeID=1Tue, 19 Aug 2014 15:56:30 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:666c856f-8e76-420f-8905-f79c4ab9b7b0Jacquelyn Pettus<p>This is a known issue that was reported and has been fixed in the latest version of InRoads SS3.</p> <p>There is a workaround available:</p> <p>Create a new alignment from the cogo points by copying the Alignment Definition, then type in a new name for a new alignment, paste in that definition and make the change/edit to apply it to the new alignment. &nbsp;Then the new alignment should have the edited definition and the extended descriptions should remain on the cogo points. &nbsp;At that point, you could go back in and Rename Geometry to change the name of the alignment.</p><div style="clear:both;"></div>