Is it possible to have End Conditions target MicroStation Solids. It seems I have seen this done somehow but not sure what the process is. Do I need to get the Solids into a Civil Model as a name object? Basically I have bridge abutment wing walls that I would like to target. In the past we would create DTMs for the wing walls and target them but now with SS3 I have the full bridge (Superstructure and Substructure) drawn in MicroStation Feature Solids and would like to use them. I this possible what am I missing?
The solids cannot be added a corridor references will not accept them. I generated meshes from the solids and they are added as corridor reference but will not show up as targets in the target alias dialog. Got out of the DGN and back in. Double checked to see if the meshes were defined as references and still not showing in target alias dialog.
Seems they would need a name or some identifier?
Mike LongstreetVermont Agency of TransportationCivil Engineering Technical SupportVTCAD Help
Mike,
Try to create a terrain model form the mesh elements you created. You should be able to target it that way.
Marc
Assign Feature Definition and a name to your Mesh. And then you can just select it from graphics in your Target Aliasing window.