Is it possible to have End Conditions target MicroStation Solids. It seems I have seen this done somehow but not sure what the process is. Do I need to get the Solids into a Civil Model as a name object? Basically I have bridge abutment wing walls that I would like to target. In the past we would create DTMs for the wing walls and target them but now with SS3 I have the full bridge (Superstructure and Substructure) drawn in MicroStation Feature Solids and would like to use them. I this possible what am I missing?
Assign Feature Definition and a name to your Mesh. And then you can just select it from graphics in your Target Aliasing window.
Mike,
Try to create a terrain model form the mesh elements you created. You should be able to target it that way.
Marc
The bridge walkway below was done using MicroStation solid feature modeling. So MicroStation only.
Mike LongstreetVermont Agency of TransportationCivil Engineering Technical SupportVTCAD Help
The solids cannot be added a corridor references will not accept them. I generated meshes from the solids and they are added as corridor reference but will not show up as targets in the target alias dialog. Got out of the DGN and back in. Double checked to see if the meshes were defined as references and still not showing in target alias dialog.
Seems they would need a name or some identifier?
Thanks I have not got to it yet but the mesh sounds like a possible answer. The Bridge is drawn using MicroStation Feature Solids. This is actual a composite steel/concrete bridge with a covered sidewalk on one side (see image below). Everything done using only MicroStation.