I uninstalled and reinstalled MicroStation and InRoads SS3 per Chris's instructions (http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16604.version-08-11-09-722-microstation-selectseries-3-08-11-09-608-prerequisite-installation.aspx) and even tapped my heels together a few times. I finally was able to load MS SS3 608 and IR SS3 722.
But. Now I get a persistent MicroStation text window: "MDL Loader: Could not load application Haestad.SUE.CP"
I tried to load the SUE folder to the primary search folder in MicroStation, but still get this message on the MicroStation launch. I can't even close the dialog. Any ideas? TIA!
My pleasure!
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
I had the same thing happen and uninstalling the SUE portion will solve it, assuming you do not want SUE function. The instruction were shown to uninstall the prior release of MicroStation and that solved one issue, but you actually should not install the .674 inroads release or you will get the SUE error.
Mike LongstreetVermont Agency of TransportationCivil Engineering Technical SupportVTCAD Help
This worked - thanks Sanders!
Hi Kate,
I haven’t been able to reproduce this error (still trying) and would life for you to try the following if you haven’t already. Remove InRoads, launch MicroStation and ensure there are no errors there. Reinstall InRoads without Subsurface Utility Engineering. Launch InRoads and ensure there are no errors, if so please make note of those for me. Next, within the Control Panel, run Change on InRoads, Modify and add Subsurface Utility Engineering (with subfolders) and then launch InRoads.
Thanks,
Sanders
Answer Verified By: Jacquelyn Pettus