Problems showing existing storm drain pipes on the sections. - Geopak SS3

Question

I am attempting to show existing storm drain pipes on the sections. 
 I created features and element templates for the pipes. The element template uses a cell for the pipe. 
 Everything appears correct in the cross section view in the modeler. The pipes are viewed properly. 
 When I create cross sections I get bad results. 
 Proposed roadway model does not appear, geopak cells are not grouped properly, pipes do not show as in modeler. 
 The proposed cross section DGN (mHC-MD197_MD197.dgn) is a mess. 
 I started the cross sections using a 2d seed model. I referenced the 2d corridor model with no nesting then the 3d corridor model with nesting depth=99. 
 The cross section file is mHC-MD197_MD197.dgn 
 The main corridor DGN is MD197.dgn 
 I uploaded/posted the files to the Road and Site Design as 
 Geopak_Support_2014_08_27.zip 
 Thank you for your assistance. 
 
 Philip Mashuda

Beebe Ray · Answer

One thing I notice with your element template is that you have a Cell Settings defined and not Point Settings. The Cross section tool is looking at the element template for the point settings.

So you will need to make that change for each pipe as shown above. You can delete the cell settings portion. Or just leave it if it is too much trouble. 
 I think you may also want to create a new dgn file and reference one at a time the corridor model, existing terrain, and the control dgn. don't turn nesting on. Then see if the cross sections plot correctly.

Nico Roman · Answer

are you going to produce geopak xs? if so, just use the ancillary data tool in legacy geopak.