https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/100654/openroads-geopak-end-area-volumes-problemHello, I am having a problem with my corridor design surface not showing up in the General area of the End-Area Volumes tool. The exisitng surface is listed but the corridor design surface is not however, the components of the corridor do show in theen-USTelligent Community 12https://communities.bentley.com/thread/298505?ContentTypeID=1Fri, 05 Sep 2014 11:14:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:da5ea834-0d03-41f5-9395-f36ce49cede7Sean Keene<p>Just to give an update. &nbsp;Based upon discussions with Kevin McDonald (Bentley) the components of my corridor became orphaned after I clipped my corridor. &nbsp;Any component mesh has the potential to be orphaned. &nbsp;There is a workaround but you will have to contact Bentley support. &nbsp;The workaround fixed my orphaned components issue. &nbsp;I have not had this issue on other corridors just this particular one. &nbsp;Kevin confirmed that this issue is resolved in the next release.</p> <p>Thanks to Kevin for the assistance.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/298383?ContentTypeID=1Thu, 04 Sep 2014 12:33:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4005c903-6e9e-4397-a542-e5174db20e70Sean Keene<p>Forgot to mention that when I create the cross sections I see a message in the lower left corner of MicroStation &quot;Method Requires Triangulated DTM&quot;</p> <p>Kevin McDonald (Bentley) is currently working with me on this issue.</p><div style="clear:both;"></div>