Hello,
For some reason when we trying to create Skew Cross Section from the model (dgn file attached),
we receiving a single cross section that is not skewed at all as we ask to.
In the DGN we draw a simple blue line the showing the skewed single cross section we need to create.
Station: 0+623.5930 R1
Skew Angle: 33.5436^
Left: 100
Right: 100
We tried in two method's: Skewed and Linestring.
Thanks.
Hi
Can you confirm which software you are using ?
Thanks
Simon Pegg B.Eng (Hons) I.Eng
Civil Support Manager
Hi,
We are using microstation 08.11.09.578 and Geopak 8.11.09.674
We had this problem reported to us just after the last release, so we have created a Priority Build of GEOPAK to address the problem (Defect 117190).
I will send you link to the Priority Build in a separate e-mail. If anyone else sees this same problem, they can contact support to troubleshoot and get a link to the build if necessary.
Thanks Kevin.
The Priority Build that you send me reacquired Microstation 08.11.09.608 or higher (in the download center this version is in German only) were I can find Microstation 08.11.09.608 in English ?
Thanks,
Assaf.
This MicroStation version shows up as a Dependency of the GEOPAK release. Therefore, to download it, just browse to the Bentley GEOPAK Civil Engineering Suite in the fulfillment center, and it will show up just underneath the GEOPAK download.