As part of the engineering drawings I need to create embankment lines (some times called piano lines or frog lines). How do I do this via the templates in open Roads.
this is what they should look like for cut and fill:
HI Martin
Can you just let us know which native civil product you are using Inroads, MX or Geopak
Thanks
Simon Pegg B.Eng (Hons) I.Eng
Civil Support Manager.
Simon beat me to asking which native product you are using, but I wanted to go ahead and give you an answer if working with InRoads. There is a tool under the native commands (Drafting > Draw Slope Direction Pattern) which will give this graphical output.
Also see this forum post communities.bentley.com/.../64196.aspx
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
You'll need to use Civil Tools > Corridor Modeling > Create Cross Sections (keyin: geometry crosssection create) to create cross sections, and from there use all the same tools you would have used with Geopak SS2. If you need followup steps, I can't help you as I've never needed to show these lines on any plans before. I'm not sure what my workflow would be after getting cross sections up.
PS: I should mention that you'll need to export your geometry to native too. Civil Tools > General Geometry > Export to Native (keyin: geometry geometry export).
Hi Derek,
Thanks for the response. Your answer does not detail how to do this. Furthermore the other issue is we use the PowerCivil Geopak suite, not straight Geopak.
So in PowerCivil SS2 Geopak it has these tools and you can create the embankment lines called "Slope Indicators with type lines". These Slope Indicators are generated when you create any object/roadway. In SS3 & SS4 this is non-existent.
Any further help would be appreciated.
Martin
Unknown said: Hi Derek, Thanks for the response. Your answer does not detail how to do this. Furthermore the other issue is we use the PowerCivil Geopak suite, not straight Geopak. So in PowerCivil SS2 Geopak it has these tools and you can create the embankment lines called "Slope Indicators with type lines". These Slope Indicators are generated when you create any object/roadway. In SS3 & SS4 this is non-existent. Any further help would be appreciated. Martin
Hi Martin, Any feedback on your problem? I'm sure their is a certain script floating around that might assist with this.... Would prefer not to have to export back to native especially since the models change daily and would require lots of drafting input.
SS4 powercivil 08.11.09.789
Thanks David
Cotation de Barbules de talus 2D/3D avec Microstation V8i:http://communities.bentley.com/communities/user_communities/bentley_general_fr/f/33444/p/94631/277653#277653