Hi all,
I am using InRoads Suite V8i SS2 v08.11.07.566. I have an alignment that I am trying to annotate the stationing. I set up my preferences and when I hit apply the behavior is strange. I've attached images to help. I would like the stationing to be displayed to be able to read left to right and parallel to the baseline and offset.
Would appreciate help!
Regards,
Christina
When in the View Stationing > Regular Stationing > Major Stationing Symbology (1), make sure you set the rotation to 'Relative to Object' and you will need to set the angle to either 90 or 270 degrees to get the text rotated to the alignment correctly (2). Then you need to set up some sort of offset. If you want the annotated text to come in above the line, set the Offsets to AFTER Rotation and set a Vertical offset to a positive value (3). This will rotate the text for the correct orientation, then it will apply a vertical offset to push it up above the alignment.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki