Stroke tolerance on linear features

Hello Jeremy,

It is not really clear to which area and settings you exactly refer. Can you please elaborate more on the question you are asking, if possible describe your workflow and add screenshots or example files, so that we can try and help you find an answer.

Thanks.

Henk

You have the config variable CIVIL_DEFAULT_LINEAR_STROKING to set the overall linear stroking tolerance. Say you want the overall tolerance set to 10, but you have a handful of features that you want set to 5. Is there a way to leave the overall set to 10 and set that handful of others to 5?

Thanks,

Jeremy

Unknown said:

You have the config variable CIVIL_DEFAULT_LINEAR_STROKING

No, we don't.  At least, most of us don't because we're not using a CIVIL_ application.  What apps. do you have running on top of MicroStation?

We're running PowerGEOPAK SS3.

Hello again Jeremy,

Since you are using PowerGeopak, may I suggest that you raise your question in the forum dedicated to that product, see:

communities.bentley.com/.../5922.aspx

Chances that you will get to the point and faster answers in that forum will be so much higher.

Thank you.

Regards,

Henk