Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Corey Baird — Wed, 08 Oct 2014 14:38:43 GMT

Arghhhh. I thought all those plus symbols were cells. I got a new mapping file with actual cells and that resolved the problem. Thank you and I'm sorry for the time you spent on this.

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Jason Walsh — Wed, 08 Oct 2014 14:02:15 GMT

I've had a look at the file 0005829_MAP.dgn. The spot levels aren't cells but are Line strings as shown below.

That is the reasons why all points are being added to the Terrain surface.

If I go to set up a Graphical Filter for creating a Terrain surface no Cells show in the list as below.

The file doesn't appear to have any cells.

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Corey Baird — Wed, 08 Oct 2014 11:52:21 GMT

Power InRoads V8i (SELECTseries 3)

Version 08.11.09.722

The mapping file I’m trying to import is named 0005829_MAP.dgn.
The name of the cell is TOPO_TIC1 and it is in the cell library GDOT-LS-Symbols.cel.
The filter is named TRP and the filter group is named GDOT_Mapping. These are set up in the GDOT_Civil.DGNLIB file.
I’ve also attached just in case, our
     - 3d seed file (GDOT_V8_3D.dgn)
     - GDOT_Levels.DGNLIB
     - GDOT_Standards.cfg (all of my OpenRoads configurations are at the very bottom.)
     - GDOT_FeatureDefinitions.DGNLIB

And I can send our our complete workspace if it will help. Just let me know. Thanks.

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Jason Walsh — Wed, 08 Oct 2014 11:21:41 GMT

Can you attach the DGN file with the CAD data so I can check the cell. Can you also let me know the version number of the software you are using.

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Corey Baird — Wed, 08 Oct 2014 11:00:09 GMT

The filter is set up using a Cell name and a level.

RE: Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with triangulation of cells representing spot elevations

Jason Walsh — Wed, 08 Oct 2014 08:28:14 GMT

How is your graphical filter set up? Are you using Cell name?