Road , curve widenning ? Inroads SS2

Yes i have seen this bt i need a more specific curve widering , i am talking about widering the aspfhalt body not the understructure of the road .?

Can you be more specific to what you are looking to accomplish?

The same concept should apply but instead of selecting a subgrade point, you can select the outside edge of an asphalt travelway component to use when widening. This video uses rail as an example but a roadway/highway should work similar with the travelway. All the same options should apply including the same .wid table to control the widening based on the curve geometry and setting up limits if necessary. If you can include more specifics on what you are trying to accomplish we can see if there is another method for widening the curve, but this tool is what is use for the easiest adjustment to widening/expanding a point to widen a roadway based on the geometry of a curve.

More specific i want to omake widering for "passing sight distance" purpose . But i dont want to select curves one by one . Is there any tool in Inroads that i just select the vehicle type, the design speed and a wid table and it apllyes this widering to all my curves ? thank you .

More specific i want to omake widering for "passing sight distance" purpose . But i dont want to select curves one by one . Is there any tool in Inroads that i just select the vehicle type, the design speed and a wid table and it apllyes this widering to all my curves ? thank you .