RE: OpenRoads import superelevation from file

Adam Wieczorek — Wed, 15 Oct 2014 13:31:12 GMT

OK. In regional settings I had List Separator symbol set to semi-colon and not comma. I should have read help more carefuly.

RE: OpenRoads import superelevation from file

Krzysztof Burdziel — Wed, 15 Oct 2014 10:59:19 GMT

Adam,

Unfortunately, I can confirm that I share the same problem.

RE: OpenRoads import superelevation from file

Adam Wieczorek — Wed, 15 Oct 2014 10:24:45 GMT

I tested that on my real world data: superelevation with more than 160 entries with no success. Then I created csv just with a few entries following the help file: again no success.

Is is a known defect or user fault? I am quite sure it was working prior to .722 release. I a using PowerInroads v8.11.09.

I find superelevation the tool that was much better in SS2. Starting with the lack of capability to edit superelevation diagram by choosing key points, lack of tracking stationing on the diagram or snaping to cardinal horizontal points. Even point you are editing in the table are not highligted on the diagram. and now the problem with importing superelevation from external source. It is really to much.
superelevation is a basic highway engineering tool. I have succesfully implemented OpenRoads on a few airside designs but for roads... it starts to be dis-beneficial.

Adam