Microstation Solids and Meshes in Openroad Cross Sections

I will call you 11:00 AM in order to work in this issue, thanks

Just is case anyone else was expecting to be able to cut sections of any modeled item, this does not work. It is filed as defect number is D14630.

Thanks
Rick

Is it Geopak specific defect? I could cut cross-sections of non-civil meshes with InRoads powered with OpenRoads. I had a corridor created with OpenRoads tools and a few corridors created with previous releases (Roadway Designer) along with bridges and I cus CS sets with all that items on it. However there was an issue that original cad levels were not mainteined on cross-sections.

Can you please give us some more info on that defect? This sounds very disapointing.

Is it Geopak specific defect? I could cut cross-sections of non-civil meshes with InRoads powered with OpenRoads. I had a corridor created with OpenRoads tools and a few corridors created with previous releases (Roadway Designer) along with bridges and I cus CS sets with all that items on it. However there was an issue that original cad levels were not mainteined on cross-sections.

Can you please give us some more info on that defect? This sounds very disapointing.

Hello Adam,

I don't know specifics on the defect as it relates to the filing, access to Bentley's bug tracker would be useful. I can tell you that I could not get the cross section creator (not the cross section viewer) to extract any non-civil solids, surfaces or meshes. It is quite disappointing being I created solid pipes of all my underground existing utilities, solid pipes and shapes of all Geopak Drainage produced inlets and links, and all ROW lines as extruded surfaces. I was planning on modeling bridges along the corridor...glad I haven't. This was one the highlighted features of OpenRoads Technology....and works quite well in the cross section model view...but back to ancillary features.

Thanks
Rick

That is strange. I cut cross section set along corridor cutting bridge deck and abuntment and get that on my cross-sections. I even logged for a defect that levels of that elemnts are changed on cross-sections when cuting through structures in referenced files.

To verify, I am using Geopak, not Inroads.

It must be Geopak specific then. However I was sure that cross-section engine would be the same for all civil products with OpenRoads technology. Do you use Geopak tools  to cut cross-sections or new OpenRoads tools?

You are right that this is advertised as one of greatest benfits of the new technology and it was one of reasons that make me migrate to Openroads.

Rick, can you try something for me? Try assigning a Surface Feature Definition to your 3D mesh you want to see in your cross sections. Does this fix the issue? You can simply use the assign Feature command. I am not positive, but I think this is a requirement right now.

Thanks
Chuck