https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/102582/cut-slope-roundingI think that several state DOTs recommend using cut slope rounding. I know that there is a setting in the template for adding rounding length to a component of an end condition. However, this does not give you any variability. According to the below diagramen-USTelligent Community 12https://communities.bentley.com/thread/306213?ContentTypeID=1Tue, 18 Nov 2014 16:45:17 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:22a139c1-fde3-475a-8dfc-0093eba14618Chris KeyWe don&#39;t have a way to set up a variable rounding lenght. What you can do is set up multiple end conditions to test the distance and set a different rounding length based on the distance at which a certain end condition solves.<div style="clear:both;"></div>https://communities.bentley.com/thread/305970?ContentTypeID=1Fri, 14 Nov 2014 18:49:17 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:09dc36da-6e7d-4e79-840c-8543ac3e2a64Joseph RusiewiczForgot to mention, this is for use with InRoads V8i (Selectseries 2) V08.11.07.566<div style="clear:both;"></div>