wrong icons under correct tooltips in Inroads

Hi Jean! I've seen this several times before, and have experienced it myself quite a lot over the years on both Custom Toolbars as well as the standard ones. It usually crops up when moving to a newer version of the software, or after installing a patch. And more than likely has something to do with a new tool being added, or one being removed. Someone may have a 'global' fix for this, but I always find myself going to Tools > Customize and doing a right-click 'Reset' on each individual tool on the toolbar. The 'Reset All' never worked for me in the past. There's probably a Registry entry somewhere that needs to be cleaned up, but I've never spent the time to hunt it down. I highly doubt that it has anything to do with the XIN or even the Workspace.

- The Zen Dude

Hi Zen (M)

Thanks for your reply.
Glad to hear that I'm not the only one with this problem :)
The Tools>Customize right-click 'Reset' brings no solution, nor did 'Reset All'.
I doubt the Registry entry to be on the basis of this problem. I've de-installed Microstation and Inroads several times whit each time a thorough clean-up of all Bentley instances in the Registry. It comes back after each new installation.
Even PowerInroads was never installed on my computer and after the first installation this mixed-up icons pop-up.
Could my HP-Z400 be the problem? Bios-update? Or Graphic card driver?

HTH, Jean

Jean, have you right-clicked on the Icon itself on the toolbar or menu. Not selecting the toolbar and doing a 'Reset' on the Tools > Customize dialog. Do it directly on the specific tool icon on the toolbar. That's the only way I've ever been able to restore the correct image.

Right-click on the icon itself gives me 2 options: Locks and Customize. Customize brings me to the Tools>Customize dialog box. No specific reset there!
Tx, Jean

Jean, sorry. First go to Tools > Customize, and then once you are in 'Customize-mode' ... then right-click on the tool and "Reset to Default".

Jean, sorry. First go to Tools > Customize, and then once you are in 'Customize-mode' ... then right-click on the tool and "Reset to Default".

Zen
Did that both in Microstation/Inroads and PowerInroads. Nothing changes.
Many thanks for your input.

HTH, Jean