GeoPAK ReadChain Error

I will try to delete the geopak resource files.

I thought that was going to fix it but I am still receiving the error shown above...

Is it possible that my install may be bad and is causing every file created on my PC to have issues? 

yes

Still receiving the error shown above. I found this thread: http://communities.bentley.com/products/road___site_design/f/5922/t/63725

It appears they were having similar errors and were able to fix them by rebooting their server. I have contacted my system administrator to reboot our server. I will keep you posted.

I uninstalled and re-installed GeoPAK by running as administrator as well as restarted our servers and still received the system fault 5 error...

are you using any custom workspaces? if so, can you try with the default/untitled workspace.
can you also describe exactly what your steps are?

Yes we are using a custom workspace provided by our client. It can be found below.

ftp://ftp.mdt.mt.gov/caddstd/

When I tried the same operations in GeoPAK using the default/untitled workspace I did not receive the system fault 5 error but it appeared GeoPAK did nothing.

The steps I am taking are as follows:
1) Open GeoPAK Civil Engineering Suite (I have my system setup to open it as administrator)
2) Open GeoPAK via Applications > GeoPAK > Activate GeoPAK
3) My system is setup to open GeoPAK survey automatically so I will use the GeoPAK Survey menu to open my project as I am editing survey data.
4) Once my project is loaded, using the GeoPAK survey menu I will access Geometry > Points > Edit
5) I will select the point I want to change the feature type
6) Click on update
7) Then GeoPAK locks up and i receive the system fault 5 error

Yes we are using a custom workspace provided by our client. It can be found below.

ftp://ftp.mdt.mt.gov/caddstd/

When I tried the same operations in GeoPAK using the default/untitled workspace I did not receive the system fault 5 error but it appeared GeoPAK did nothing.

The steps I am taking are as follows:
1) Open GeoPAK Civil Engineering Suite (I have my system setup to open it as administrator)
2) Open GeoPAK via Applications > GeoPAK > Activate GeoPAK
3) My system is setup to open GeoPAK survey automatically so I will use the GeoPAK Survey menu to open my project as I am editing survey data.
4) Once my project is loaded, using the GeoPAK survey menu I will access Geometry > Points > Edit
5) I will select the point I want to change the feature type
6) Click on update
7) Then GeoPAK locks up and i receive the system fault 5 error