https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/103841/ss3-ss4-productivity-booster---profile-view-from-referenced-dgn-fileMost of OpenRoads power comes from Microstation rich referencing capabilities. That is a huge advantage when compared to SS2 InRoads Roadway Designer where all corridors must be in a single ird file to see each others. we have a geomtry.dgn file anden-USTelligent Community 12https://communities.bentley.com/thread/347011?ContentTypeID=1Mon, 16 Nov 2015 19:17:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0981b419-3a05-4343-a230-dd65e6e5d986David NeidigI would like to also advocate for this enhancement. I would also like the ability to run through a corridor (read-only is fine) from a different file than where the corridor is stored.<div style="clear:both;"></div>https://communities.bentley.com/thread/311090?ContentTypeID=1Wed, 14 Jan 2015 11:18:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f23fe048-be99-42ff-a7ab-7af140bc8aeeJason WalshEnhancement 157025 has been logged to be able to view the profile of element in a referenced file.<div style="clear:both;"></div>https://communities.bentley.com/thread/310966?ContentTypeID=1Tue, 13 Jan 2015 12:25:01 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:5bcf5821-5e5e-4151-8467-13cafbba17ebWesley NybergI agree. It would also be nice if the profile could be edited when referenced. Maybe there could be a way to unlock/lock the profile when it is in a reference so you have the ability to adjust it but also the ability to once it is set and not going to change to lock it.<div style="clear:both;"></div>